Sparkwizard's latest activity

Even in cars, everyone over sizes the carbs. This leads to lazy airflow and poor fuel atomization. A smaller bore will actually work...

Which Mikuni carburetor? It has to match the engine, more or less, or it could be like having a Holley 1150cfm 4-barrel on a 50cc...

Ah sorry! I did take my cutter to it and was able to knock off the extra bits that the previous owners welded on. The holes on the...

Gotta tell us what you did?!?! All new, or cut and fix?

I do not know if you can run a stock tec h40 carburetor with a pulse pump. I do know I have pulsed many a carburetor and besides a very...

Oh dear. Rose62’s new photos remind us of the “economy of space” the original engine configuration afforded with its whole tank mounted...

I looked at it again, and Bubba sure welded it up pretty good. Might be hard to get a cut-off wheel in there to get it loose from the...

Just keep telling yourself that, despite the fact that you’re in the DIYGK asylum with the rest of us.

That looks like a tie rod end welded to the spindle. It can be removed with some cutting and grinding, but, honestly, I think I would...

I’m sure your figuring out any carb that isn’t the stock tank carburetor will need it’s own throttle cable and gas tank. The Tillotson...

I have never used a tecumseh carburetor with this intake I have only ever used the Tillotsons. Really do hope it works for you and you...

Even at that, it's likely too close to work without modding the cover.

You can find a Tec carb with a 90 degree inlet fitting.

I forgot about partstree.com. They are amazing. Did you know you could use your model number to look up a part, then click on the part...

What he said ⬆️. Tecumseh plastic fuel tank, the kind with a red cap. The screws do not penetrate through the top of the tank, they have...