Recent content by Solidshot

  1. S

    getting the best out my engine?!

    Web I tighten the nut at the end of the axle the hub tightens slightly and moves with the axle a little more then before. Could this be why, when I had it out and I put my foot down the back end swerved out to the back right?
  2. S

    getting the best out my engine?!

    To the best of my knowledge its a thunderkart, i brought it cheaply from a friend of a friend. He said they have just been sitting there for a good 3-4 years doing nothing. Also could you explain the jackshaft and the power/exhaust stroke part? Getting hold of sprockets and chains shouldnt be...
  3. S

    getting the best out my engine?!

    Heres are the photos of the axle and hub (They should be attached!) Anyways after looking at the go kart and having some serious thoughts im not a whole lot sure that it would be possible to mount a second engine on there! In the next couple of days im going to get out there with a tape measure...
  4. S

    getting the best out my engine?!

    I think there is, it appears that one set of bearings stayed on the axle when I took the hub off and the other two stayed in the hub. I did get a few pics but I'm on my phone ATM. When I get home ill upload the pictures. So today I removed the linkages from the governor arm to the throttle arm...
  5. S

    getting the best out my engine?!

    So todays undate - I took the back right wheel off, took the hub off make sure it was greased okay, but it back on but when i put it back on i made sure that the nut holding it in was in tightly! Put the wheel back on, started it up, no trouble at all! Turning the wheel by hand now does seem...
  6. S

    getting the best out my engine?!

    How do I get the right wheel fixed the the kart? Will it give me any advantages with driving? Also could it be the reason the back end kicks out when I put my foot down?
  7. S

    getting the best out my engine?!

    Right so just got a rbeak in the rain and went to take some pictures here they are! A couple of the axle and the things that hold the axle in place, also the two wheels to show the difference between the wheel that turns with the axle and the one that doesnt...
  8. S

    getting the best out my engine?!

    I've just gone out to check, can't get a picture it's pouring down with rain at the moment, the axle is fixed to the back left wheel the sprocket is fixed to the axle. The axle is held in under the kart by axle holder I guess you'd call them. The axle is live right up until the back right wheel...
  9. S

    getting the best out my engine?!

    From what I can work out its not a dead axle well at least half of it is. I'll try and get a picture for you lot :)
  10. S

    getting the best out my engine?!

    So gentlemen i figured i should probably give an update on whats happening. Turns out the engine wasnt siezed, i was talking to my dad about it and he said that if i could pull the cord and the fly wheel turnt it should mean that the pistol wasnt jammed, here what actually happened - One of the...
  11. S

    getting the best out my engine?!

    I have a few ideas in my head but I'm going to wait to get both engines working first, don't want to be running before I walk :) but that's kinda the plan!
  12. S

    getting the best out my engine?!

    Right a thought I've just had whilst eating my lunch lol I have a replacement engine on the way, if I could get the governor out of both, and do the same mods to both the engines would it be possible to put another sprocket on the axel and have another engine on the kart? Just a thought I'm...
  13. S

    getting the best out my engine?!

    I have a socket wrench not a torque wrench I don't think, the manual I'm sure I can find somewhere on the net:) Yeah will give that a check! In the unlikely event that there is a load of dirt in there what's the best to use to clean it out?
  14. S

    getting the best out my engine?!

    Sheeze, got me some reading and note taking to do when i gets home from work tomorrow, Im hoping to starting ripping it down Saturday, before i start i want to check that im not going to need something specialized? Like ive got shed loads of WD40, carb cleaner, Gunk and over oil+grease remover...
  15. S

    getting the best out my engine?!

    Yeah was kinda awkward talking to him and trying not to flip out! But like said above I guess now I have the ideal opportunity to learn all about how it works and how to fix the engine, so be prepared for a barrage of stupid and amateur questions lol :)
Top