Recent content by Shauns

Will double check but pretty sure I was , I will give you an update tomorrow . , I will have another play with it .

A:furious2:nyone know the correct setting on these valves , its hard when I don't even know the brand , it is some kind of copy I presume . It was running off measurements that I guesses , so I though I should do it properly and found some measurements on the net but now it will not start I did...

yeah , I didn't have a clue on what to look for but on the weekend I bit the bullet and did a compression test and all was good so it only left one more thing the valves . I didn't realise it was just the 4 bolts I had to undo and booom there they are lol

very late update , I had lost interest in fixing it but on the weekend I decided to have another play , had a look at the valves made some adjustments and now shes a goer again :wai::wai::wai: Now to do some research and find out what the valves are supposed to be at because I just took a guess...

yes it does look like its had a long life , I am going to have a real good play with the carb tonight and then off to the dump with it :) well not to the dump but will pull it completely apart once I buy a new one just so I can get to know what the inside looks like . Thanks for all the advice...

Ok I have been trying to upload a video for you to have a look and the internet is so dam slow here it will not do it . I will keep trying , Last night I pulled everything off it carbie , electrics etc. cleaned everything and put it all back together and that's now 2 hours of my life gone ...

Na very free

Yes replaced , now the thickness is a good question that I do not know, I just bolted it there not knowing what it had to be . will check later and get back to you

Hi thankyou for the feed back , fuel tank drained ,new fuel line new carbie . Thought maybe the new carbie is a defect so put the old one back on and ran the same . As far as rings go I would have thought it would be blowing smoke if rings where no good ? valve lash etc. I have no idea about...

Brand spanking new clutch just fitted yesterday , wasted 100 dollars because that's what I thought the problem was . I thought the clutch was engaging to soon and therefore wouldn't let it rev . what's really confusing me is even if I jack up the back end it still won't rev ul straight away it...

Na I've even stood on the back and used the throttle with my hand on the carby . I'm completely lost on this one . will try and lost a video in the next days

OK here we go 10 teeth on the clutch going to 48 teeth , then 16 teeth through to 40 teeth on the Axel , hope that makes sence , now the wheels have a diameter of 440 mm ( 17.323 inches )

I took the exhaust off today ,for no real reason and it did slightly move it better but just will not get up into revs . NOt enough power to drive around the yard . I was thinking sprockets but then I ws thinking this thing is like 20 years old built by some old farmer guy with 1 tonne of steal...

Still trying to load pics , will count the teeth when I get home

How do I post a PIC , sorry first time on here ---------- Post added at 01:27 AM ---------- Previous post was at 01:09 AM ---------- Will post some pics tomorrow , the internet is way to slow here so will do it at work . ---------- Post added at 01:28 AM ---------- Previous post was at 01:27...