Recent content by scarinu10

Thanks for this. This helps me explain my problem a but better. I think the belt itself is fine. I'll have to do some measurements this evening. However the moveable face is sliding on the shaft away from the outside drum. I have the drum lined up on the splined shafter properly with the...

Ah. Wonderful. Lol . How in the world do I get it to stay together and not slide on the shaft ---------- Post added at 04:46 PM ---------- Previous post was at 03:46 PM ---------- Also with this being a torque converter I'm shocked I don't have a back plate or the notched washer for the front

Sorry thought the pics posted. It's a comet clutch. The clutch piece wants to slide out of the housing back on on the shaft toward the engine . It ends up binding up the belt when it does that. What am I missing ?

Hey guys, Still pretty new around here and tried to do some searching around Google to no avail. I recently swapped a Tecumseh 6.5 out to a predator 212. I took the clutch and everything that was on the shaft of the Tecumseh and put it on the predator. However it's a two piece clutch and if...

Just did a speed test. I'm in the low 20s now . Still not where I want to be i feel like the advertised 30mph range would be perfect. Not sure what the next thing I need to look at would be . I do know the cars and cameras guys put a predator carb on a worn out Tecumseh and achieved 36 mph...

Reporting back.. seems to have been just needing to bend this spring some. Haven't gotten a speed yet but it is much faster. When I started this thread I was only running 12 mph

This is with the throttle cable off tho. I'm operating the the throttle at the throttle plate. When the engine is not running the throttle plate will push the carb to wot. But with it running it won't go to wot. But as soon as I shut it down it'll return straight to wot

1st image is wot with engine running . 2nd image is wot with engine off .

Yes I thought the same.. but also read my edit that I just did. It'll pull the carb wot with the engine not running . But while running it's barely pulling on the carb. I can hit the Killswitch and watch the carb moving towards wot

Well that seems to be my issue. Revving on the pedal is yielding much less than revving at carb ---------- Post added at 03:23 PM ---------- Previous post was at 03:03 PM ---------- So I've got it narrowed down. When the go kart is running and I use gas pedal it will not pull to wot. But...

When I rev the engine up at the carb it does not move the speed switch and pull on the spring. Wot at the carb looks like this

It's a Tecumseh ohh65

Quick update. Been messing around with it today... I'm definitely achieving wot with the pedal. It pulls the speed switch up and pulls tension on the spring. But my rpms just are not getting up there like they should.

It's been so long since I've used a forum I'm trying to remember how to add pictures. Lol ---------- Post added at 09:44 PM ---------- Previous post was at 09:38 PM ---------- https://photos.app.goo.gl/iGaTnmu8k1HUTA1H7 ---------- Post added at 09:44 PM ---------- Previous post was at 09:44...

Just picked up a yerf dog 3203 and was told it needed a carb. Bought a carb and voila ! However I seem to be having a speed issue. The governor is turned all the way counter clockwise . I'm new to small engines and this goofy *** throttle /governor spring setup is frustrating me . Engine...