Recent content by Revwhop

I’m with you on the throttle. I’ll be remembering the spring. Gonna put some hours on it this weekend. See what’s needed after that.

Mine didn’t have that much grease but it was there. What does moving the spring,gaining tension on driven do. I’m not fan of stock throttle set up either.

I lowered and moved the rear fender back. This was done to possibly allow room for exhaust. And make space for air filter. It is still quite stiff without the top bolts just the sides. I have a piece of 7/8 aluminum tube I’m using to mock up the path. I have decent route up high under...

Vpd66 if you take clutch belt and drive chain loose spin and check for slack and gritty feel in the jackshaft. I'm going to replace bearings in wheels as well. You can also remove the non removable jet with torx t15 bit lightly tapped in and unscrew it. It was screwed in but doesn't have...

Yes they are 6003 bearings. Kevbo22 how do you not burn your self. Doesn't look like much room between feet peg and yee old hot pipe. If it went towards rear first and then came down like it does behind TC cover. It would be perfect. How do you get TC cover off

I got intake figured out for most part. Hopefully slightly increased air restriction doesn't call for jet downsizing. I like that It gets my filter out of harms way and hopefully minimizes mud and water getting to it. It may need braced but that shouldn't be to hard if needed. Could...

Purchased a mega moto 212 bike on eBay as a "parts not working". It has front suspension and tc and The disc brakes are sweet. Only problem I have found was one jackshaft bearing exploded. I replaced both of them seems to be alright. The bearings that came it with are trash. The Other was gritty...

Bike now running 43.2 mph 3700rpm. I’ve seen 3840 but wasn’t running gps. Satisfying top end With plenty of low & mid power. This throttle linkage is poo. I’m not in control of throttle. It is more like i request for throttle plate to be moved. I think I’m going to remove governor and it’s...

To remove Unremovable jet I just tapped t15 torx bit into it an spun it on out put the tube and 37 jet in. Got it all back together and I'm gonna run **** out of it tomorrow so will see how it does against dads bike now. It's sure to sound better than his. Now It sounds like something that's is...

Flyinhillbilly send that list over. I'm going to build kart when I find decent frame for decent price. . I only need to win by a little bit and I don't believe others will spend much if any on their bikes. But I have acquired a new addiction with these mini bikes. so maybe I need a crazy fast...

Finished up exhaust. Just need to wrap it up. May yet add support bracket will see. I had to tweak header to get it where I wanted it. Didn't get the chain today was too busy. And Still have to finish intake side but it's almost did. You can see the air filter tucked up underneath seat it will...

My 2019 model Ct200u ex has 19" tires. 16mm output shaft. 10 tooth clutch, 20 tooth js in, 10tooth js out, and 50 tooth sprocket. So I forgot the extended chain. The omb riser lifts and moves motor forward. So the chain now about 3" short will have to get one longer. I knew I needed longer...

I am Not gonna get in to this motor. Stock internals. only external bolt on. I'm after mid to high 30s Any faster I'm likely to spend more time at hospital than on bike. Like my dad. He went to dr got X-ray and ct scan. He has broke rib from when he crashed his bike Saturday. But if I need...

So my plan of not running it till all upgrades were done went out window when My dad showed up Saturday with his own mini moto 212. So I had to join in the family fun. His bike is fast. Blows right by me. But I guess now I will know how much was gained after upgrades . Currently 24mph is it...

It is still in box. I'm not sure of exact motor it has. Box says 196cc. From my research these new ex ones have 16mm shaft. I don't really need cheap options. I'm willing to spend more than bike cost in upgrades. I'm after just good solid products so as not buying same but different components...