Recent content by ohv_

I haven't buttoned anything up right now, fitting it. Yeah I have the pedal stop at full throttle. I can adjust the controller to the max voltage so it'll know WOT. Cool. I'll make sure the tube is solid so I doesn't move around. Cheers.

@Hellion its a egokart build. Here's a few more photos for you. Looking at it, I should have routed the cable under the 2nd tube. It's only a temp solution to hold the throttle down. 😀

Right now I have this double sided taped down. The black hose is not mounted to anything. Should I use something to keep it in place? On the next blue tube I thought a simple band clamp or zip tie just to hold it. Originally the area that has gray paint had a tab for the cable. That ran to a...

Does any one know a replacement for a pb6 for a 3 wire? 5v, gnd and signal. This is what I have working however I'd like to use a pb6 style to use the original pedal for the kart. Topkart sells a 2 wire however that wouldn't work.

Thanks but all good here now. All tires mounted at home with the new tools I got. I plan on pulling the kart apart soon to clean up the wiring.

Yeah I was a bit shocked. I called a ATV shop as well they would do it IF I bought tires from them and none in stock for gokarts. So i passed.

While taking the old tires off the first one I took out the grinder to cut that ish open! The bead wasn't moving but I think the HF tool for me was junk. The new bead breaker made it easy and took moments.

You need help from time to time!!! lol. I wanted to give up and let someone else do it, but nahhhh, my son said have it done. yeah, it's a mess on the table but the bead breaker and tire scissors. If I get a moment sure. it was still a pain in the arse but I'm guessing the SunF tires are not...

Ditched the HF and picked up these two tools. Under 200 bucks... Local shop wanted 15 dollars a tire, i plan on getting another set. Saved a few bucks i guess. If in Socal need to use em let me know. =]

for deep wheels the seat on the rim isn't long enough and need to come up with fun ideas to make it work, maybe if they included more plastic fillers it would have been better. the rears were just had to deal with, fronts no problem. getting new tires on the rear isn't going to easy, going to...

Yeah. Looks just tight enough to let the wheel spin and yeah that's damn tool I used... total junk haha.

Managed to get the fronts done, new valve and bearings. On the spindle, is there a torque spec to follow? Reading finger tight for the cotter pin to go on.

Picked up the mini tire changer from Harbor Freight and I goofed the rim trying to get the darn thing off. Any tips or why I did this so I know what not to do?

started yet? haha

yeah totally agree. Cleaning the metal is also important too! I hit it with a flap wheel but probably leaving stuff on the metal doesn't help. I just finished up moving the battery from the middle (under the wheel) to the left (opposite side of the motor), kiddo didn't like the battery there...