nickster_90's latest activity

Hellion appreciate it but no need to be sorry the puzzle and geting it right is part of the fun in the first place!

I’m sorry that replacing parts is not cut and dry, it is very frustrating with these old karts because there is very little...

How wide is part #24? Since we don't know the length of the original jackshaft I think you can mock it up if you wanted, with a wooden...

The picture you showed should work. Always better to have it a little long. The picture you posted, the shaft is actually too short, and...

Im unsure of its width and can not finde spec for the part I like th dowel idea I know the jackshaft tube is about 10.5" and that i have...

In the photo of our kart the drive is just mocked up hand tight after taking it back apart to mesure shaft and keyway the problem with...

Don't have pic of old shaft but It would be where 23 goes threw the tube on the motor on parts diagram plate can see the tube bottom...

My kilowat project came with a broken jackshaft and my driven pulley on my torq requires a 5/8 with 3/16 key my question being new to...

I do agree there is alot of difference in the two but I was thinking more about situational awareness type stuff though I will say the...

Sounds to me like your 11 and 14 year olds were asking to use the family car and actually drive. While it is a noble thought to use a...

Welcome! Nice project.

Way to go, Dad. They will be better drivers because of what you are doing. Not to mention having a lot of fun with that kart. Welcome to...

Yeah it is on the green side

Looks like a great project. Welcome to the madness!

Hello all thanks for the add! Im excited to get started on our family project. Im new to gokarts. However my 11 and 14 yo asked to learn...