Recent content by MIKartDad

Ty !! That’s what I’ve been seeing when I google it … They sell 5/8” sprockets ! Found a 16T to go on the tc .. would be 8.43:1 , they also have a 24T which would bring it down to 5.62:1 … 🤔 Also plan to go to 18” tires in the future

You have to understand .. the final “trans” gear is 9:1 … so the gears between the t/c n the trans need to be 1:1 or >1:1 to be 9:1 , … rn with the 18T/20T I’m 10:1 … so you’re saying stay there ?

Recommending a cvt to a gear ratio I have now ? I think in 10:1 now … with the 15t roller sprocket I have it’ll drop it to 7.5:1 I think , then I want to get 18” tires n ditch the 22’s

This is one of the first drives after getting the throttle hooked up better https://youtube.com/shorts/v-LnMJKsQyQ?si=TlvluHqasv80WHan

See if that works …? video link work ?

https://youtube.com/shorts/bjx_RvoLjPg?si=rd_U2EbbsCl8dy0g

I definitely would .. if I knew how lol do I have to convert a video or something to post it on here ? But , she does run pretty good, changed out the main jet and got the carb dialed in , just need a caliper now($150) 😳 cuz I’m getting up there in speed now and still haven’t put on the 15T...

Ty … should that net me a decent top end ? 40+?

So a 15 would put me around 11.25 … 🤔?

From the ground about 21” … 10psi

I’ve read I take the 20T / 12T =1.667 Then multiply that by 9:1 9x1.67=15.03 if I’m thinking this out correct .. If I go with a 12T(rear) / 14T(clutch) =0.857 9 x .857 =7.713 which would be dropping it more than half … am I following this correctly?

Moves just fine imo … very quick to get to 21mph but that’s it …

So you’re saying … bring the 20T down to say a 12T so it’s 1:1 with the 9:1 reduction box ? Am I understanding that correctly?

Hi Guys … new here… Just got a Fl250 in a trade , has a 212 on it .. Took it out .. top speed was 21mph I’ve since installed a vm22 carb (tuned to perfection) and a pipe .. my question is how I should go about the gearing .. because 21mph isn’t going to cut it It’s a 12T clutch to a 20T...