Karttekk's latest activity

Crack the gas cap open slightly and try it. The cap vent could be clogged or restricted limiting fuel flow or creating vacuum as things...

The 150cc engine and the 200cc engine are basically the same engine except the 200cc engine is water cooled. Refer to this manual and...

The first time I drove a kart was back in the 60's, it was my buddy's kart. I blew through 2 or 3 stop signs because I had no idea how...

After watching it again the kart seems to have survived for the most part. Not sure about Pap though.

It didn't appear to have any slack in it, maybe it was just the angle of the picture. Generally chains need some flex or droop to allow...

Chances are that kart ended up in a dumpster afterward.

Ran across this online. Guy needs some practice. https://www.tiktok.com/@michaeljames1_/video/7645381076696845581

Here's another good source for Tecumseh anything. https://www.barrettsmallengine.com/p/tecumseh-parts-lookup.html

Usually you can tell which CDI you need is by turning on the headlights. If they illuminate with the engine off you have a DC CDI. If...

There looks to be no clearance where the chain is close to the nut next to it plus it appears too tight. See if this video is at all...

Sorry! I just heard the pager go off. Been busy with lawn mowers. Do you know if you picked up a DC CDI or AC? What are you working on?

Good deal. Have a blast!

I'm not sure about that, hadn't heard of that ever happening. Do you know how to adjust the governor? Loosen the 10mm bolt on the gov...

Not sure if it will help but the chain needs a little bit of slack or droop. If it's too tight it will bind up and cause the engine to...