Recent content by Jaundre46

I see, but I positioned my engine so that the sprocket lines up between those 2 bars because my seat was in the way... I'll take a pic from the rear once I get the axle back

I managed to get the engine started last night with the electric start, I forgot to give the engine itself a direct earth to the battery.... stupid of me haha! As for the sprocket I'm going to take out the small piece of crossbar that's in the way, the axle is already at the engineers to make...

I did put the pipe on upside down but it is not a slip on it is a full length pipe, I'm thinking of cutting it and adding some pipe to lengthen the exhaust so that it can be mounted properly... I checked the kickstand for a switch but their is nothing I'll check again tonight I think something...

Their is a few wires coming out the side of the engine with 2 plugs conecting to the wiring harness.. I'll try I and sort it out tonight got the battery on charge again...

Thanks buddy i hope so just need to sort out the wiring because I plugged all the wiring and cdi on to the engine and connected the battery but the starter solenoid just clicks and doesn't turn the engine over. Don't know what I'm doing wrong, because when I kick start the engine it fires right...

Ander kart thanks for the info, sorry for my late reply was a bit busy... got me a new engine decided on a four stroke 150cc manual bike engine got it for a bargain, I bought the woke bike and stripped it for the engine, also took a few mount of the frame to use on the gokart got it mounted...

It's probably the my post on my introduction I also asked the same question their and I thought of maybe putting it in the general section, I might get more info but then the guys gave me allot of info on my introduction post, Im now thinking of scrapping the whole four stroke thing maybe and...

hi rassie i sent you a pm thanks

thanks for the info i will go and check out the size of the 9.5hp engine today, i understand what you mean on the gear ratio and the sprocket sizes with the ground clearance i have and etc...

Otherwise will a 150 scooter engine be better than a 9HP lawn mower engine?

Hi landuse nyc to see a south African on here, :wai: Ok so 13hp is too much on the kart and as u say fitting is going to be an issue then I might have to go with a 9HP, will it be easier to fit than the 13hp? Klerksdorp is nyc I grew up here , I worked in Randburg for 3 years and then moved...

Hi guys, new to the forum. I recently bought a oval track kart with a 100 cc pcr engine but the piston and crank is damaged the chassis looks similar to a tony kart frame but I'm unsure, anyways I thought of buying a new engine for the cart saw on the internet that the gx390 looks like a fun and...

Thanks for the reply, the reason I thought of the gx390 is I don't want to regret later that the kart is to slow, so I thought let me put the big fella in and that way I know I already have a decent powered engine? How is the 9.5hp compared to the 13hp? Also how does a jackshaft look?

Hi guys my name is Jaundre and I'm from South Africa, I recently bought a oval track kart with a 100 cc pcr engine but the piston and crank is damaged the chassis looks similar to a tony kart frame but I'm unsure, anyways I thought of buying a new engine for the cart saw on the internet that the...