Recent content by IainBarnard

  1. I

    south africans unite!!!

    Okay listen I'm from boksburg, south africa and I'm in desperate need for a 3/4" (25mm) centrifugal clutch with a keyway the output can be teeth, or pully. Anyone know of any places close to boksburg, johannesburg area that would sell a clutch?
  2. I

    need urgent feedback

    Hey guys, I need to know hou I'm going to mount a keyed clutch on a un-keyed shaft, the shaft is ¾" and has an 18(mm)x[1.5(mm)pitch] and I have 2 ideas, more ideas wil be appreciated, btw the arrows are where I plan to weld
  3. I

    5HP + JohnDeere stx38

    Anyone there? I need feedback
  4. I

    5HP + JohnDeere stx38

    Hey guys, I've decided to get myself a centrifugal clutch, but I need to mount the keyed clutch to the non-keyed shaft, I have two ideas, look at the pictures and tell my what you think, the arrows are where I weld*
  5. I

    5HP + JohnDeere stx38

    What is the biggest hole in a certri that you can get? (Bore)
  6. I

    5HP + JohnDeere stx38

    I was thinking of maybe putting a pin through the shaft and the clutch
  7. I

    5HP + JohnDeere stx38

    Listen guys, any ideas on how to mount a keyed centrifugal clutch on a non keyed shaft??
  8. I

    5HP + JohnDeere stx38

    Sorry here's the images
  9. I

    5HP + JohnDeere stx38

    Today I decided to build pedals for the kart* I used 1" x 1" square tubing and made it so that I don't need to stretch to compress the pedals. I also added a tension spring to that if I over press the brakes, I don't damage anything
  10. I

    5HP + JohnDeere stx38

    Yeah man, you see I need a 1(engine) to 1.5(trans) so my trans is spinning faster than my engine, so maybe a clutch would be better*
  11. I

    5HP + JohnDeere stx38

    How much do you think your converter would be?
  12. I

    5HP + JohnDeere stx38

    At grogro the 400 csc series is only R430, which is much better, but it only engages at 2200rpm, is that going to be ok? Or should I pay R200 more and buy a clutch with ajustable springs?, it would be nice to get a clutch, but until then I think I will use the belt cluch* how does a tourqe...
  13. I

    5HP + JohnDeere stx38

    Thanx man, that second link you gave me, if I wanted to buy a centrifugal clutch, their R1200 that's quite a lot, and I need the ¾" bore, and I don't know if its got a keyway, and what does the "c/w" mean?
  14. I

    5HP + JohnDeere stx38

    Thanx, I'm thinking of key"ing" my engine shaft, the mount a pully on that. Can you direct me to someone that used a pully tension clutch (with pics) thanx
  15. I

    5HP + JohnDeere stx38

    Thanx man. Any idee where I can have a 120mm(diameter) pully made with 18mm threads?
Top