Recent content by Gears

Or fill it with nitrous and blow it down the Carb Sent from my SAMSUNG-SM-G930A using Tapatalk

See where the rust marks are? I'm getting alot of chain rub there Sent from my SAMSUNG-SM-G930A using Tapatalk ---------- Post added at 09:35 AM ---------- Previous post was at 09:29 AM ---------- OK it fits but like I said it's getting chain rub on those bars should I grind down? Sent...

Will that change the direction of the chain and make it only drive on reverse? Sent from my SAMSUNG-SM-G930A using Tapatalk

It's came early and it's brand spanking new I got mine for $74 but they can be had on buy it now for $80 ebay predator motors are legit and a go at this station!! Sent from my SAMSUNG-SM-G930A using Tapatalk

The motor is HERE!!! But I'm running into the issue you described the oil cap is in the way I removed the oil cap to see if it would clear and it still won't maybe I have it set on there wrong could you post a picture of how you have yours? It'd save me alot of time Sent from my...

The TAV won't clear the oil cap ....when I remove oil cal it still won't clear the exhaust manifold Sent from my SAMSUNG-SM-G930A using Tapatalk

OK guys good news the motor is here ebay seller made good on the deal and it arrived 1 day early brand new it appears perfectly functioning 8hp for $70 now for bad news the TAV-2 also arrived today however I can't fit it on the 8hp or I'm not installing it right any help is appreciated! Sent...

Center of bolt hole adjacent diagnol to other bolt hole Sent from my SAMSUNG-SM-G930A using Tapatalk

Yes just got bolt circle at 3 1/8 and the bore I'll get when I have spare time going to get a 60T #41C made from website posted earlier Sent from my SAMSUNG-SM-G930A using Tapatalk

Thanks yall I'll try to get the bolt pattern and the bore figured out its a Helix 150 by American sportworks not sure if that helps any it used to have a 150cc Gy6 motor Sent from my SAMSUNG-SM-G930A using Tapatalk

Where can I get a bigger sprocket that will fit this tho Sent from my SAMSUNG-SM-G930A using Tapatalk

Oh and motor is a predator 8hp sorry Sent from my SAMSUNG-SM-G930A using Tapatalk

Looking to get someone's 2 cents on the gear ratio setup I'm thinking of running I'll be running a #41 chain with a axle spocket 31 teeth to a TAV with 10 teeth on a 30 series setup do you think thats enough torque to the wheels to get this buggy rolling without a push? Oh and tires are 9x9.5-8...

Done that with a wheel hub Sent from my SAMSUNG-SM-G930A using Tapatalk

The one I bought was like $30-40 Sent from my SAMSUNG-SM-G930A using Tapatalk