Recent content by gear

Hello, great site and very helpful. Have posted twice in regards to a new kart I just got and had some issues with. You are great people, Will look forward to hearing from you in future, as Im sure I will have more questions. Be carefull and thanks again

went to gocartsupply.com and seen set up. looks to be about 300. looks like it applies to the axle shaft as a whole and just replaces the clutch/sprocket application. Is this correct? Gives two options. Would there be adjustments needed to make sure distance from crank and axle are good. gives...

got kart this way, dont know what you mean about the different set up. If possible could you be more detailed on how to do this and what it does. About how much would it be. Dont know anything about gokarts.

went to take pictures. touched axle sprocket and it moved. one spot weld broke. You can wiggle sprocket about 1/8 inch back and forth-theres my problem. But here are pics for any suggestion or changes I should make.

First of all, thank you to all who helped me out. Not real sure about different applications on karts and have not been real experienced with them either. One had mentioned changing the ratio of sprockets. Like I said before the clutch has the 10T and the axle has a 72T welded to it. Still...

thanks, will do that. Also, got the springs loaded in. Sanded pads and drum. Smokes and getting very hot. Like I said before, the throttle cable is only about 1/2 throttle with pedal all the way down. Have to push pedal all the way and slowly starts to take off. Smoke was coming from wd40 I used...

can not find the springs anywhere locally. Ordering off site, thanks for the help everyone. Here is the kart by the way, being new to site, guess I cant have image by name yet, this way you all can see what is being worked on

says purple are standard but red are optional. This kart is for my 12yr old daughter. She has had a couple karts and a four wheeler. She is has been riding them for about 3 yrs now. The throttle cable is only set up for about 1/2 to 2/3 throttle travel. Have to reach back and push for WOT. What...

Part# 'NA180153' Noram Enforcer Clutch For 10T #40/41 Chain (Purple Springs Installed) looks identical to my clutch, was pretty sure the guy said it was an enforcer, but the other pics didnt look like it. The 10T is it though.

used your link, didnt look like it, my clutch has groves around the side of drum. Looked up the noram clutch, looks like the arena style. And yes, solid face meaning no heat release. Thank you

unable to locate any kind of part number or information on clutch.

got a rigid frame 11hp go kart. Clutch is bad, start it up and wants to take off and continues to gain speed without even touching throttle. Took of clutch drum and two springs were loose from the shoes. Reconnected and barely tapped shoes, one spring came loose again, other stayed in. It is set...