Functional Artist's latest activity

Edwn, Now THAT'S what I call a good answer. Thanks. I suspected, as did Griz, that it was emissions related. These days when I...

Hey WTR, I removed the front "saddle" ta drill out the hole, for the steering shaft, in the FG * So, I didn't affect (over drill) the...

A view of the cockpit with the inner "saddles" installed ;) A view of the rear "saddle" area ...from up underneath Installing the...

Now, on to the rear inner "saddle" :) Put the "blank" in the bender Same procedure, ta produce a "curve", as before Got all of the...

Sorry (not sorry) for all of the "info dumps" :thumbsup: ...but, "if" ya think about it ...most of these "steps" are only 15 - 20 min...

Let's start off with the front inner "saddle" :cheers2: I did a (3) part bend ...each bend ~1/8" apart ...ta try-n-make a curved bend...

Gonna use some of the 18g. steel ta make the rear inner "saddle" ...as it doesn't need ta be cosmetic (will be hidden by the seat)...

Lookie what I found on the side of the road (stainless steel refrigerator door) ...musta fell out of the back of a scrapers truck...

OMG well spotted 🧐 i didn't make that connection myself. Some quick and rough calculations later - motor rpm should be around 5500...

Nice! ...kart & video presentation :2guns: You mentioned the battery & charger voltage was 72VDC ...but, I noticed in the video, the...

Did a review. I'm not much for presenting so take it with a grain of salt...

I can see now that I didn't verbalise the actual price. That will irritate some people 🤭 Though I did put the price on the...

Wheel spacers We need "spacers" between the hub (bearing) ...& the Caliper mounting bracket/spindle To maintain the proper distance...

Now that we are working with these white rims ...I gotta get out the custom hubs, T made to work with these rims These hubs "ride" on a...

Hey WTR, I have one of those rims too ...hope it doesn't have issues...too My buddy T (Master Hack) did some (lathe) work ...where...