Recent content by Durvelle27

In Memphis close about 10 minutes from the Mississippi

Existing frame but custom engine I built years ago

TN like 300FT above sea level. That’s not much and gap is .070

Wasn't straight dry but Doesn't seem to have any leaks. I still took it back off though and am remounting it. Float stick on a brand new carb would be crazy and that would cause the carb to flood out I'm in TN so we're at sea level It might be a jetting issue. I posted on other forums and...

Wasn’t wet when pulled. I mean just a little residual but not like actually wet

Same exact carb. Never had the OEM carb for the engine. Same jets biggest change was flywheel, valves, and gov delete checked valve lash and it’s .002 on exhaust and intake

Shoot i've had this engine over 7 years and yes I changed the oil. Was overfilled before changinng Engine ran perfect before i changed the flywheel and valve springs and removed governor

TN

Whats up guys, new member here thats struggling to get my kart running. Engine is a Honda GX140 After market parts installed Mikuni vm22 (120 Main Jet and 36 Pilot Jet) Bilet Flywheel that advances timing 32 TDC 22LB Valve Springs Completely Removed Governer Straight Pipe Exhaust Everything...

Hello everyone, New member here. Always wanted to own a kart since i was kid and now I finally got around to be able to throw one together as an adult :banana:. Joined the forum for advice and tips