Recent content by dudarino

  1. D

    ? from a Noob..Clutch getting hot....

    Well I myself have lowered throttle to lowest point before it stalls changed ratio to 6:1 and have relized clutch is going to get hot....so will weather it out and see how long it lasts! I did relize though the faster you go the cooler it stays....so I will just go fast! Thanks for all the input...
  2. D

    ? from a Noob..Clutch getting hot....

    Ok so I finally got some time and replaced the clutch/sprocket/chain all to size 35 and 6:1 ratio 12t on clutch and 72 on sprocket. Well the clutch still gets hot as hell.....guess the idle needs adjusting but to a point that makes no sense since when i just let the engine idle the clutch never...
  3. D

    ? from a Noob..Clutch getting hot....

    How would I lower the idle of my engine?....or should I wait to see what how a new clutch reacts to it first? Just to let you know when I bought the cart and the guy gave me the clutch and chain you could tell they had been sitting out in the weather for sometime.
  4. D

    ? from a Noob..Clutch getting hot....

    Please someone answer this question.....after looking at some pictures on the internet it may look like my clutch is missing the bushing. When I take the snap ring off my clutch there is an outer shell and inner shell.....nothing else. Is that correct or should there be a bushing on the shaft to...
  5. D

    ? from a Noob..Clutch getting hot....

    I did put some engine oil on the bushing yesterday and that did not seem to help the heat build up....Took it out today and the chain broke.....so since the sprocket does not have a size on it, I think next payday I may invest in a new sprocket, clutch, and chain so I know what size they all are...
  6. D

    ? from a Noob..Clutch getting hot....

    Yes someone else has brought this up......so a sprocket with more teeth? Also upon further troubleshooting I relize that the shaft is always turning even at idle...which I believe to be normal operation, but the clutch does slighty engage...if I where on a flat surface kart would inch...
  7. D

    where to get a good cheap engine

    Well I am new to go karting myself but bought the 6.5 Predator and so far has worked very well. I also did my own throttle linkage with the great help of previous posts. Just giving my opinion on the Predator.
  8. D

    ? from a Noob..Clutch getting hot....

    Ok, have read many threads which have helped me in my build. I bought a Thunder Kart frame with axles and sprocket and clutch included. Bought a 6.5Hp Predator from HF. My clutch has 10 teeth and sprocket has 54. Have 13" Tires(Though I measure them at 11"). Can not tell on sprocket or chain...
  9. D

    Hot clutch question from a newbie...

    OK...so I bought a Thunder Kart frame and it came with the clutch and tires. I then bought new tires and the Predator 6.5 hp from HF. Have done alot of reading threads to make sure I got things right hopefully. I have 13" tires on the back. 10 teeth on clutch. 54 teeth on sprocket. Clutch has...
Top