Recent content by Cromatt

  1. C

    Axle + Sprocket Queries

    Thanks for all your help everyone, i'll start a build log when i first start and i'll keep it updated and if i have any questions i'll ask. thanks again anderkart, toystory, landuse and mckutzy!
  2. C

    Axle + Sprocket Queries

    The WMS axle comes with snap rings as well if I recall correctly, if I was to install 2 stems mechanical calipers would it be viable to move the sprocket outside the frame near the wheel and put another disk where the sprocket originally was? That will probably turn out to cost around $90, I'll...
  3. C

    Axle + Sprocket Queries

    do you think a band/drum brake would be more efficient? a hydraulic brake calliper kit is out of the question due to price though but i think i might now use a brake rod assembly rather than cable if it requires less pedal slamming. the rear rims are These ones there which have a 1/4 keyway and...
  4. C

    Axle + Sprocket Queries

    The brakes i have been looking at are the stens mechanical brake and 1"bore disk seen on this page, the set up i was looking at was something along the lines of . using a throttle cable and housing attached to a pedal like a throttle, or alternatively use a brake rod set up
  5. C

    Axle + Sprocket Queries

    Great thanks for all your help i've decided to go with 16" turfsavers so i'll use the 60t sprocket. Another question back on the topic of axle's, if i buy this axle and this sprocket hub, i have to buy 1/4 keystock's such as this which i think (correct me if i'm wrong) just slots into the axle...
  6. C

    Axle + Sprocket Queries

    this is one example here which says 2600 RPM max power output and 2500 max torque not sure if this is correct or not :S
  7. C

    Axle + Sprocket Queries

    This concerns me a tad as all the 13hp engines I have looked at state they have 2600rpm power, not sure if that's right or I'm missing something because that definately has confused me. I never saw that model noram clutch Anderkart so that is definately a better option I think the enforcers a...
  8. C

    Axle + Sprocket Queries

    Thanks for the feedback, I was hoping to do around 25mph would your suggested gearing be appropriate and is there an advantage over a certain tooth pitch (I think that's what it's called :P) because in this type of kart there seems to be only 35 or 40/41 options. And a main issue is having a 1"...
  9. C

    Axle + Sprocket Queries

    Hey, just putting a list of parts together for a road/grass 13hp go kart build and am wondering what the difference between a normal axle and a live axle and the advantages/disadvantages of both. Also my desired clutch is a noram 1600 14t #40 and am wondering what size sprocket would be...
Top