Understood. I've scoured the thing for any sign of brand etc. But can't find anything on the exterior.
It has an A/C stator. But, I have a coil and 4 pin dc cdi that I ordered.
If I wire the coil to get 12v from the battery, ground, pulse, and signal to the coil. Shouldn't it give me spark...
I can check that as well. Though, I can't seem to see any kind of indicator etc coming from it where it would get a cutoff signal.
---------- Post added at 01:40 PM ---------- Previous post was at 01:39 PM ----------
I will check this as well. I don't recall specifically looking for this...
I watched the video of this and mine does not have a pull start and the drive system is a yoke that goes to a carrier bearing with a sprocket on it and then down to the axle.
I can't fine where the 50cc mini buggy says that it has reverse. I'm pretty sure that mine has reverse as well.
He made it sound like one day it was running fine, the next day the starter was turning over very slowly. Which is what it was doing when I got it. I changed the starter and it cranks just as it should. But it won't run or attempt to run.
I guess that I was operating under the assumption that these little chinese honda clone engines were essentially the same.
Mine does crank. Another thought is that the wrong flywheel or stator was put on. But the gasket seemed to be original.
I thought about the keyway, but the timing seemed...
Hello.
I'm having some issues getting a second/third hand kart running.
It looks to be something like the gk-110. It is the smaller sized mini kart. It has a shifter in the middle of the two seats.
Previous owner said it was running fine until the starter went out. It would turn over slowly...