Recent content by cody22

Problem fixed I figured out the problem it ended up being incorrect bet alignment thanks to all who helped fix the problem!

I got it good now but it seems to get very hot after 10-15 minutes of use. I have idle set really low. It also doesn’t seem to advance to high range when driving also, maybe this all has something with gearing? Thanks, cody

Looks like the driver pulley is too far in. I have both the spacer and the washer installed, I’m gonna see if I have a washer 3/4 Id to see if I can space it enough to line up. If you got any ideas that would be appreciated thanks! Cody

The torque converter came with a washer and the spacer maybe could that washer be removed and space it evenly? And also how would I align the belt? Thanks for your input, Cody ---------- Post added at 09:20 PM ---------- Previous post was at 09:10 PM ---------- I double checked and the...

10-15 mph lol

I just finished my go kart and i put a series 30 chinese knockoff cvt on it. It has that then a chain running down to a jack shaft that goes to the right side to connect to the sprocket on the rear axle. Problem is, it is eating up my belt. I have idle set almost as low as it can go and stay...