Recent content by chain

  1. C

    Building up a 3hp briggs

    Not any interest here for this project but here is the motor pretty much just needs to be put together. Dyno cams custom 3 hp cam 94ss weld and grind, 5 hp flo - jet, port polish, 5 hp lifters, 5 hp springs, cut head, wiseco piston, spring pockets, chamferd bores, billet flywheel,
  2. C

    1950 Schwinn

    Special wide cranks for clearance, need to keep the pedals so it's street legal.
  3. C

    1950 Schwinn

    Oh yeah jackshaft will be mounted at 90 degrees to seat post tube.
  4. C

    1950 Schwinn

    So some things came up for a while and the toy had to go on hold. But I ended up scrapping the Kawasaki engine and going with a 3 hp Briggs I/C. Carb is a 5 hp flo - jet ( probably need to get something bigger but I like the stock look) had DynoCams weld up and put the 94ss grind on a factory...
  5. C

    1950 Schwinn

    Xxx
  6. C

    1950 Schwinn

    Xxx
  7. C

    1950 Schwinn

    Pics
  8. C

    Drill Press Vice

    X-2
  9. C

    Building up a 3hp briggs

    I've tried all the usual places and checked the custom places, about the only thing carried is the 3hp billet flywheel, and coil bracket. I'm sending my cam Monday to Dymocams.
  10. C

    Building up a 3hp briggs

    My welding skills are lacking severely as well as decent shop space in winter, iv put money away for a cam, so having one welded up for me is my only option right now.
  11. C

    Building up a 3hp briggs

    Something like this. http://www.ebay.com/itm/Tecumseh-carburetor-HSSK50-HS50-HS40-5hp-4hp-choke-intake-manifold-lever-bracket-/320992082630?pt=LH_DefaultDomain_0&hash=item4abc9e7ac6. I can make the parts for an intake. Drill the oil hole , polish the rod, and you suggest a 224 or 223 cam. Where...
  12. C

    Drill Press Vice

    I finally brok down and bought a cheapie cross slide should be here today, should be fine for light use that I'll give it. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=350706766035
  13. C

    3hp briggs throttle linkage and ?s

    Carb is original type, first two numbers off serial number are year, I have a bunch of parts for a 3 hp, air filter casing as well as all metal cams, float type 2-5 hp flojets with manifolds, and remote tank. those diaphragms carbs aren't the best. Looking to get a billet rod ? I'm trying to get...
  14. C

    Building up a 3hp briggs

    Help needed Don't know why it double posted.
  15. C

    Building up a 3hp briggs

    There are no billet rods that would fit a 3 hp. So I would like to get the motor to get to max at around 6000rpm. Let me know if something sounds wrong I'm going port in and out, the exhaust has the threads as well as holes for bolts so I'm going to smooth out threads and go with 1 in. header...
See more
Top