Thanks.
My son's engine is a 4 stroke with a breather (crankcase venting) fitted into the valve cover so I guess the intake manifold is the only place I can tap a pulse then. I've read something about Walbro pumps having a spring to push the diaphragm back to help on a 4 stroke. I'm using a...
I do overthink this, you're right. It's just that the last pulse pump I fitted (a knock-off I guess) for my son got him stranded in the middle of nowhere so I want to make this right.
I do have fuel dripping out of the overflow tube sometimes.
Did you use the pulse form the intake manifold too...
Well there are 2 things that raised my concern.
1/ since I mounted the pump on the frame of the scooter (a gy6 copy), the pulse line is pretty long. I think longer than 20 inches. But I used thick and tight tubes. Can too long pulse lines make the pump weaker in some ways?
2/ I got curious...
So if I understand correctly, as soon as the throttle valve opens, manifold vacuum which operates the pulse pump goes out the window? Isn't that kinda opposite to the idea of using a fuel pump in the 1st place? To make sure that we get enough fuel flow at high rpm?
I'm using pretty thick tubing...
Hi,
I'm new to the forum.
I got a pretty strange project on my hand.
It's not exactly a go kart. But the idea behind using a pulse fuel pump (which is pretty popular I think) is essentially the same.
I have an engine with the misfortune of having the fuel tank on a lower level than the...