Recent content by bhorst519

  1. B

    Torque Converter on Street Kart

    I started with a 54 and it wasn't fast enough and revved too high. I tried a 28 and it had no torque at high speeds and revved too low. Why would a 60 be better? That would just go slower and rev higher.
  2. B

    Torque Converter on Street Kart

    Messed around with the valves. Switched them out with the old springs. Tried different lashings. No big differences. I think my best option is gonna be a new drive sprocket. Somewhere around 35 or 40 I guess.
  3. B

    Torque Converter on Street Kart

    By torque, I mean initial accelerating torque. The high end torque is definitely lacking a bit.
  4. B

    Torque Converter on Street Kart

    I'm measuring the speed with my phone using a GPS app. I've checked it in a car, and it's pretty accurate. It sounds about 3500 RPM if I had to guess. I could check though. I think the torque is just about perfect. It gets me going well, but I don't feel like I could do with out much of it. The...
  5. B

    Torque Converter on Street Kart

    I got the sprocket and TC after much trouble. (Both had shipping/stock problems). Installed them and went for a go. After less than five minutes, the inner disk on the driven clutch broke from its weld. Since Comet is out of business and there's little chance of warranty, I welded it back...
  6. B

    Torque Converter on Street Kart

    Thanks for the sites. I'll be ordering the parts soon. I'll let ya know how it goes.
  7. B

    Torque Converter on Street Kart

    Sorry guys. One last question. I seem to be having trouble finding low toothed drive sprockets for #40 chain. Any website suggestions?
  8. B

    Torque Converter on Street Kart

    Wow. Thanks a lot guys. That was fast. That's perfect. I've done a lot of math with different sprockets. I think my favorite is the TAV 10 tooth with a 35 drive. That's awesome speed and acceleration. Thanks again.
  9. B

    Torque Converter on Street Kart

    In the last six months or so I've been building this little go kart. It's a single seater homeade frame. It's pretty light, about 120 lbs, plus me of course. I'm running a 6.5 hp blue honda clone with 18lb valve springs, high-flow filter, straight pipe, and drilled carb jet. Opened up, it runs...
Top