Recent content by AndreyStankotorg

  1. A

    Snowmobile engine in to tube frame buggy, radiator hoses ?

    AnotherFatBoy — yes, you want a bypass so coolant can still circulate and the engine can come up to temperature before the thermostat opens to the radiator. On most of these twins the lower port on the thermostat housing is that bypass, teed back into the front (pump) inlet, and the upper port...
  2. A

    Hi. Go Kart Newbie Here needing help

    southernyankee98 — Denny and panchothedog have the right idea: you don't necessarily need a full shop of your own, but the replacement pieces need to be cut square and to length before they go to a welder, or before you weld them yourself. A hacksaw will get you there, but it is easy to get a...
  3. A

    Hello from Moscow - band saw guy

    Hi all, Andrey here from Moscow. I work at a company that sells metal-cutting band saws and blades, so most of my day is tooth pitch, blade tension and why a blade snapped after two cuts. Full disclosure so nobody's surprised later: I'm with the vendor side, not here to sell anything. I found...
Top