Recent content by alwaysinboost

  1. A

    WOT issue with 79cc Predator engine

    I'm not an expert in reading plugs, but I know a little bit about what to look for. I don't think this issue is fuel related, or "hunting" as you call it. If you watch the video, the RPM fluctuation is very rhythmic. It doesn't seem at all like a fuel delivery issue. Also, the motor is...
  2. A

    WOT issue with 79cc Predator engine

    is this "hunting" though, or is it a governor issue? I pulled the plug this weekend to air the CC out because it was flooded from trying to start. Plug looked fine. no signs of running lean that I can tell.
  3. A

    WOT issue with 79cc Predator engine

    I tried relocating springs, using different tension springs and removing springs, but nothing seemed to make it better. Mostly it just made the kart run worse. I did some research on removing the governor... https://www.affordablegokarts.com/govenor-removal.php would it be as described in the...
  4. A

    WOT issue with 79cc Predator engine

    I put a new predator engine in my sons kart a few weeks ago. we got all the bugs worked out and slowly he's getting used to the power. He is at the point where he can hold WOT all the time and still control the kart, so I figured he's about ready for more power. Problem is I can't get the...
  5. A

    Road Rat motors kid kart project with lots of questions!

    I have a #35 11 tooth 5/8" clutch for the 79cc motor. The issue I am having now is finding the correct sized drive sprocket for the axle. the sprocket is a 1-piece design on a 1" axle. see pics. any ideas help??
  6. A

    Road Rat motors kid kart project with lots of questions!

    i measured several times... and looking at the old chain that came off the kart compared to a new #35 chain you can see the spacing for the links is drastically different. much wider spaced on the #35 chain. we have 92 links on the old chain and if you count out 92 links on the #35 chain its...
  7. A

    Road Rat motors kid kart project with lots of questions!

    thanks for the links Fabroman & Kartfab. I have an idea where to start off now with regard to the throttle linkage. my next hurdle is the drive sprocket and reducing speed. like I mentioned in my original post, the drive sprocket is a 65t with .338" pitch, has anyone dealt with a .338" chain...
  8. A

    Road Rat motors kid kart project with lots of questions!

    Hey all, first time posting. I found this site by accident while researching repair/replacement options for my son's Road Rat Motors kids kart. We bought him the kart last year from a friend and he loved it while it was running. With only 79cc motor it was plenty fast for him. So fast that I...
Top