Recent content by Abyssion

I have set it both before at .0025 before too and I heard people even set at .001 before also. My hemi 212 is set at .002. Maybe my decompresser is broken? means i gotta open up the side 😫

This is technically a downgrade, my previous head was a hemi ducar and that had no lash cap on EX. This Hisun head is basically stock from another engine. All stock down to the valve seal, rod, retainer, rocker arms BUT its 22lb springs. So I brought the lash cap with it. I've set at cold engine...

also i can not start this engine yet, has not kicked over. should I check my EX Lash if its kicking back? Make it tighter? It also still has a lash cap, should I remove the lash cap? Could this just be a compression issue, like too much compression? Reason why because I had the spark plug on and...

I have a tillotson 212 block with Hotmod 2 cam and billet rod, 22lb spring, 212R Cast Alum Flywheel. I have a hisun 196cc non hemi head, I used the Original gasket from the Hisun head along with all the valves, valve rotator on the Ex and pushrods. Only difference is the 22lb spring. Now I...