GPS Mega moto's, just pulled the trigger on two!!!

[BaconBitRacing]

Of course, hope to finish this one tomorrow, I have to buy a socket today...then start on the other one

You’re telling me you don’t have every socket size imaginable? Oh, while you’re at the store, pick up a 1 1/4 inch 1/2 drive socket for me.

 

[Bansil]

You’re telling me you don’t have every socket size imaginable? Oh, while you’re at the store, pick up a 1 1/4 inch 1/2 drive socket for me.

I am picking up a 1/4 hex to 3/8 sq and a 3/8 drive 15/16 socket for my impact

I do have a 1 in drive set for working on my bus, they go to 2-1/2 in or similar

 

[Bansil]

So due to...ugh...cough...cough...delays today, opened and sorted other bike, 99% of stage 1 upgrade got lost in shipping for 1st bike was hoping it was in 2nd bike...nope , nothing broke so far on this.
Just need to start assembly

 

[Bansil]

1st run

Does video work? 1 hand is very hard on these

 

[BaconBitRacing]

1st run

Does video work? 1 hand is very hard on these

Looks pretty nice, maybe you could strap the phone for action, high speed shots?

 

[Bansil]

Wow...started out as lazy day....we decided to do something at lunch she built a step thing for neighbors dog and planted some flowers......4 hrs later (I was left alone)







4 hours, 3 beverage breaks and was ripping it before the storms....big difference between the two bikes op

 

[BaconBitRacing]

Wow...started out as lazy day....we decided to do something at lunch she built a step thing for neighbors dog and planted some flowers......4 hrs later (I was left alone)

View attachment 137433
View attachment 137434
View attachment 137435
View attachment 137436
View attachment 137437

4 hours, 3 beverage breaks and was ripping it before the storms....big difference between the two bikes op

You’re telling me you didn’t go to church? I’m just messing with you, now you got two purdy bikes. Question, why do the have a jackshaft and run it on the right and not just run the chain straight on the left?

 

[Bansil]

You’re telling me you didn’t go to church? I’m just messing with you, now you got two purdy bikes. Question, why do the have a jackshaft and run it on the right and not just run the chain straight on the left?

Corinthians II covers that

And dunno, reckon it's just the kit aspect...you can use everything in these chassis


Eta...except maybe an LS

 

[BaconBitRacing]

Corinthians II covers that

And dunno, reckon it's just the kit aspect...you can use everything in these chassis


Eta...except maybe an LS

Forgive the offender!
the whole chain thing doesn’t make a lot of sense to me, but I’m no engineer…

 

[BrownStainRacing]

Wow...started out as lazy day....we decided to do something at lunch she built a step thing for neighbors dog and planted some flowers......4 hrs later (I was left alone)

View attachment 137433
View attachment 137434
View attachment 137435
View attachment 137436
View attachment 137437

4 hours, 3 beverage breaks and was ripping it before the storms....big difference between the two bikes op

You doing better then me. I uasally do 3hrs and 4 beverages breaks, back to back,

 

[BrownStainRacing]

@Bansil
You saying 1 bike pulls harder then the other???

 

[Bansil]

Yes, the one today, blows the other away.

The one today has a nipple on valve cover, the other has just a hole with hose stuffed in it for crankcase vent.

I have to assume everything else is the same, gearing etc.

 

[Bansil]

Oh buy the way...if you put the driver on backwards it will still run...just noisier and won't go uphill since the "ramp side" won't work right yesterday was a long day....

 

[BrownStainRacing]

You know 1 is a hemi, right???

The hemi has .5 more compression ratio. Don't sound like much, until you have had them on the same bike with the same set up, as you see, there is a difference in only a .5 cr bump.

 

[Bansil]

Yes, the one today, blows the other away.

The one today has a nipple on valve cover, the other has just a hole with hose stuffed in it for crankcase vent.

I have to assume everything else is the same, gearing etc.

 

[Bansil]

You know 1 is a hemi, right???

The hemi has .5 more compression ratio. Don't sound like much, until you have had them on the same bike with the same set up, as you see, there is a difference in only a .5 cr bump.

Is the hemi the one with nipple on valve cover? It is definitely stronger

 

[Bansil]

They have same sku also

 

[BrownStainRacing]

Is the hemi the one with nipple on valve cover? It is definitely stronger

Yes. The hemi has the cast aluminum rectangular valve cover.

If you look at the carb, on valve cover side, it has an adjustable low speed air/fuel. It's a better carb, but not much difference in size.

Also, most of the time the gov spring is in the wrong hole, for utility equipment. You can move it over to pick up another 300-400 rpm before the gov pushes the throttle back. That's on both engines.

 

[Bansil]

Got hold of GPS and gave them pictures and a missing parts list, just got delivery of some pcs at the shop/house, no telling were USPS left it

Will update!

Well, got the missing/broke pcs!

 

[Bansil]

Here is 1st part of a trail about 1/2 mile with quick google measurement

Should end up with about a mile and half of trails, the sharp corner is about where the shed is