devino246
Official DIYGK Chem Nerd
Another boat motor project. This one is a mid-60's Evinrude outboard. 4-cylinder, 2-stroke, electric shift.
Pulled the starter off, disassembled, cleaned, reassembled, and reinstalled. Wiring harness is falling apart, so I pulled that off and plan to rebuild it.
Up next will be the carburetor, ignition, and cooling system, then probably lower unit and electronic shift. After that, we'll see if it'll run.
Pulled the starter off, disassembled, cleaned, reassembled, and reinstalled. Wiring harness is falling apart, so I pulled that off and plan to rebuild it.
Up next will be the carburetor, ignition, and cooling system, then probably lower unit and electronic shift. After that, we'll see if it'll run.