Snow blower 30$ honda and bed frame trike

Budget GoKart

Aka a kenbar
Messages
1,910
Reaction score
46
Location
roachdale, indiana
Heres my junk scrap trike the snow blower ran and worked just wouldnt spin the blade fast enough and barely would propell itsself and everything was wonky
Nothing was worn badly just the motor and clutch where a bit tired. So i proceeded to carefully remove everything until it was the engine mount axle and sprocket and wheels then welded very thin wall bunk bed tubes to it and together and stuff, a free car bucket seat, my 30$ honda gx200, a free clutch i got in trade, the origional chain from the snow blower, and a wonky bike front end that fell off. Fun project i built it in one day at the end of that one day, the frame broke at the joints in the front and then the fork neck bent and my gussets held lol!
It does mean burnouts and im wondering if i can make riding mower rear tires fit on it because that would be rad
 
Last edited:

Budget GoKart

Aka a kenbar
Messages
1,910
Reaction score
46
Location
roachdale, indiana
Oops forgot pics20210114_112330.jpg
 

Attachments

  • 20210114_133139.jpg
    20210114_133139.jpg
    3.4 MB · Views: 7
  • 20210114_140355.jpg
    20210114_140355.jpg
    3.8 MB · Views: 7
  • 20210114_162534.jpg
    20210114_162534.jpg
    4 MB · Views: 7
  • IMG_20210114_185033_717.jpg
    IMG_20210114_185033_717.jpg
    162.9 KB · Views: 6
  • 20210114_173852.jpg
    20210114_173852.jpg
    2.1 MB · Views: 7
  • 20210114_173916.jpg
    20210114_173916.jpg
    1.5 MB · Views: 7

Dingocat

Broke
Messages
541
Reaction score
23
Location
NE Ohio
Looks like more of an issue with the welds than the base metal. Cool one day scrap build tho. Solid rear tires deffinitly will make the ride interesting
 

Budget GoKart

Aka a kenbar
Messages
1,910
Reaction score
46
Location
roachdale, indiana
Looks like more of an issue with the welds than the base metal. Cool one day scrap build tho. Solid rear tires deffinitly will make the ride interesting
No the metal bent because its super weak my welds where holding strong no welds really broke it was the metal collapsing
 
Top