Pulse pump and catch can

[WillMatrix]

So lately I been having a lot of oil slinging from my built predator. I read up on the advantages of oil catch cans but please let me know if it’s a way I can run my pulse pump off my catch can.

and if there is please let me know the steps

 

[karl]

Tee fitting in the line between the catch can and valve cover will do.

If you have not already, you should remove the reed valve from the valve cover.

This is a hemi, right? Another way is to drill and tap the valve cover for a 1/8-27 pipe thread , and
add a hose barb. You can find them on the shelf at any auto parts store.

 

[WillMatrix]

Tee fitting in the line between the catch can and valve cover will do.

If you have not already, you should remove the reed valve from the valve cover.

This is a hemi, right? Another way is to drill and tap the valve cover for a 1/8-27 pipe thread , and
add a hose barb. You can find them on the shelf at any auto parts store.

It’s a hemi and I already have the barb in my valve cover, it’s the see through cover. Can you show me a picture? I’m so lost with this catch can and pulse pump thing

I also have a chikuni with the intake adapter if I need to figure out another pulse