Need ideas or info on a fat tire rear sprocket flange with drum brake
- Thread starter srcjahc
- Start date
mckutzy
Well-known member
What is a 4/4 wheel???
that largely depends on the type of rim you'd like to use..
is it offset or not?
you can buy twin hubs on nearly any kartshop
usually meant to take a sprocket on one and a brake disc on the opposite side
or a sprocket and a rim.
unfortunately those are mostly light duty hubs (smaller bhc)
but they come in various length usally around 4"
And with a centered (zero offset) rim, that makes it useable for a 8" wide rim.
personally I would just buy a wheelhub for the rim, and a sprockethub to match the sprocket..
both made from the same material to match with a similar material tube and weld them together.
downside: sprocket hubs are usually for "live axles" and mini bikes usually use a fixed acle and bearing in the hub.
but nothing one cannot work around with some tools in the shed
'sid
is it offset or not?
you can buy twin hubs on nearly any kartshop
usually meant to take a sprocket on one and a brake disc on the opposite side
or a sprocket and a rim.
unfortunately those are mostly light duty hubs (smaller bhc)
but they come in various length usally around 4"
And with a centered (zero offset) rim, that makes it useable for a 8" wide rim.
personally I would just buy a wheelhub for the rim, and a sprockethub to match the sprocket..
both made from the same material to match with a similar material tube and weld them together.
downside: sprocket hubs are usually for "live axles" and mini bikes usually use a fixed acle and bearing in the hub.
but nothing one cannot work around with some tools in the shed
'sid