Possom Point
Active member
Redoing another Manco dingo, picked this up last year off the Book of Faces. For $300. A couple young guys or brothers, got there hands on it and “funked” it up. Boys being boys I suppose, I did my share when I was younger. But these guys Incorrectly mounted the motor and torque converter, drilled the crankshaft crooked and tapped the bolt about 3/8” in…….. Crankshaft is shot, let it sit outside drank up rain water and such. Bugs made homes in everything. So anyway bought a HF 224, and new torque converter parts and a few spicy parts to put on this engine To get her back going again.
We blanked Out the background on the first 3 pics since they were from the original FB post, (didn’t want to show the guys stuff).
I had to literally cut the motor off the mount from where the guys welded to the frame to. Again they tried to make something work to ride around on.
We blanked Out the background on the first 3 pics since they were from the original FB post, (didn’t want to show the guys stuff).
I had to literally cut the motor off the mount from where the guys welded to the frame to. Again they tried to make something work to ride around on.
Attachments
-
A5610040-5168-45CC-85EB-818993CD04E6.png887.4 KB · Views: 14
-
A82FB280-F7C9-40D4-BA3A-DA3F0B862515.png957.5 KB · Views: 14
-
BC82FB41-3F51-488B-B94B-5D92C9739254.png1.3 MB · Views: 10
-
00BF8B81-AF40-4C6C-8A22-23B7289A9882.jpeg5 MB · Views: 14
-
40EF4BFC-94FE-43DB-8521-58982231884B.jpeg2.5 MB · Views: 16
-
73DB92A8-B0CC-44A3-B8F7-33C2AE474F40.jpeg1.7 MB · Views: 17
Last edited: