ezdasnowman
New member
so i was wondering if i could use the power from the kill switch wire along with a voltage regulator to power 1 light...? any thoughts, i'm not trying to put a alternator on my engine, if ii have to maybe a small battery ....
i figured this was a bike or something because, i know some bikes run headlights off the coil.. What engine are you actually speaking of?
The stator has separate coils for lights and ignition, the ignition coil is much smaller and finer, so it makes good power at very low RPM(if the coil ran on the main stator you would most likely need a battery). This is not always true however, I have push started a VW powered sandrail with a completely dead battery.
The stator has separate coils for lights and ignition, the ignition coil is much smaller and finer, so it makes good power at very low RPM(if the coil ran on the main stator you would most likely need a battery). This is not always true however, I have push started a VW powered sandrail with a completely dead battery.