Flamdragz
New member
Maybe this was a mistake, but I am building a go kart by modifying some existing plans I found for free on the net (I’m increasing the size so it is a little bigger than the plans). I order 2 seats from BMI karts (bucket seats) as the bench seat was too narrow for the increased width of the frame.
The seats arrived with no instructions for mounting, no hardware, nothing. I have scoured the web looking for how to install the seats with little luck.
I am wondering if someone can help me figure out how to install the seats onto the frame. The driver seats has a slider, but the passenger seat does not.
Any help would be greatly appreciated!
Rob
---------- Post added at 10:12 AM ---------- Previous post was at 10:11 AM ----------
Here is the link for the seats I purchased:
https://www.bmikarts.com/Padded-Bucket-Seat-Set-2-for-Go-Kart_p_3216.html
Rob
The seats arrived with no instructions for mounting, no hardware, nothing. I have scoured the web looking for how to install the seats with little luck.
I am wondering if someone can help me figure out how to install the seats onto the frame. The driver seats has a slider, but the passenger seat does not.
Any help would be greatly appreciated!
Rob
---------- Post added at 10:12 AM ---------- Previous post was at 10:11 AM ----------
Here is the link for the seats I purchased:
https://www.bmikarts.com/Padded-Bucket-Seat-Set-2-for-Go-Kart_p_3216.html
Rob