Field Rescue

Crazznewt

Member
Messages
49
Reaction score
6
Location
Springfield, Missouri
Found these in a field. Used flap discs to remove rust.
 

Attachments

  • 20200703_193518.jpg
    20200703_193518.jpg
    4 MB · Views: 15
  • 20200704_081809.jpg
    20200704_081809.jpg
    4.7 MB · Views: 13
  • 20200708_135252.jpg
    20200708_135252.jpg
    1.4 MB · Views: 11
  • 20200708_135312.jpg
    20200708_135312.jpg
    1.3 MB · Views: 9
  • 20200707_111240.jpg
    20200707_111240.jpg
    1.9 MB · Views: 9
  • 20200708_221705.jpg
    20200708_221705.jpg
    1.2 MB · Views: 10
  • 20200710_143642.jpg
    20200710_143642.jpg
    4.5 MB · Views: 16
  • 20200713_124653.jpg
    20200713_124653.jpg
    3.5 MB · Views: 17
  • 20200925_210957.jpg
    20200925_210957.jpg
    2.7 MB · Views: 14
Last edited:

Crazznewt

Member
Messages
49
Reaction score
6
Location
Springfield, Missouri
Saw these on craigslist (The top two are the before pics) I drove 30 miles to pick these up for cheap. They were actually under a lean to and it took two of us to drag these out of the grass that had growed up between everything. The guy was an old race car fabricator who had dealings with big time racers Rusty Wallace and Larry Phillips
The rust was just on the surface but all the tires and front bearings were ruined. I picked up some nearly new big 8" mower tires that fit the rear and bought the Krylon paint for half price at a local thrift store. I had a stash of other tires that I used to complete this project not to mention the pallet of elbow grease I had available.
 
Top