R03|_
New member
Hello,
I`m Roel, an engineer from The Netherlands.
I wanted to share this project with you guys, and see what you think.
We started on this electric kart as a test and promotion project for electric driving.
The plan is to use a ME1616 motor and a Sevcon Gen4 controller running at 96V.
We got this used donor frame intended for a twin motor setup. This has a beefier frame and double frame rails on both sides to handle all that extra weight of batteries we want to put on.
We drew up the layout in CAD to figure out the positions for the main components.
After that out comes the cardboard and tape so we can get an idea on the space claim of all the parts.
I`m Roel, an engineer from The Netherlands.
I wanted to share this project with you guys, and see what you think.
We started on this electric kart as a test and promotion project for electric driving.
The plan is to use a ME1616 motor and a Sevcon Gen4 controller running at 96V.
We got this used donor frame intended for a twin motor setup. This has a beefier frame and double frame rails on both sides to handle all that extra weight of batteries we want to put on.
We drew up the layout in CAD to figure out the positions for the main components.
After that out comes the cardboard and tape so we can get an idea on the space claim of all the parts.