Colman kt 196 jerky

Denny

Canned Monster
Messages
8,075
Reaction score
4,300
Location
Mayberry, Indiana
I know you think we are being difficult and don’t want to help you. This could not be further from the truth! We want you to be the hero to your kids! Since we are not there to physically see and touch the kart we have to rely on your descriptions and pictures and what you can see and feel. At some point you will have to get dirty and start taking things apart. Just be prepared for that eventually.
 

Hellion

Disc brakes are for cowards
Messages
5,371
Reaction score
709
Location
Location: Location:
Take a video, post it to Youtube then post the link to the video so we can all see.

That's probably the easiest way.
 

jwedeles

New member
Messages
11
Reaction score
4
I’m g
You’re going to want all that straight first before trying to figure this out. Because if the belt is not flat and tight against the shieves it won’t allow full contact and will momentarily slip. You might want to weld in some reinforcements so it does not happen again
You’re going to want all that straight first before trying to figure this out. Because if the belt is not flat and tight against the shieves it won’t allow full contact and will momentarily slip. You might want to weld in some reinforcements so it does not happen again.
yea I’m going to order a new motor mount and start there
 
Top