2015 - Project Rocket Kart #2

Status
Not open for further replies.

rushking19

Active member
Messages
1,045
Reaction score
0
Location
Richmond Virginia
This Is My 2015 DIYGK Build Entry, Project Rocket Kart,Go Kart With Snowmobile Engine Build,The Motor Is A 1970 Rotax 399cc Type 401 24hp , So Far The Only Thing Ive Done Lately Is Take The Engine Mount To Go Get Welded And Cut Off The Old Engine Plate Today More Updates Soon.
 

Attachments

  • IMG_20150519_092607.jpg
    IMG_20150519_092607.jpg
    95 KB · Views: 29
  • IMG_20150519_092618.jpg
    IMG_20150519_092618.jpg
    98.7 KB · Views: 22
  • IMG_20150519_092623.jpg
    IMG_20150519_092623.jpg
    82.5 KB · Views: 23
  • IMG_20150519_142446.jpg
    IMG_20150519_142446.jpg
    151.3 KB · Views: 29
  • IMG_20150519_142451.jpg
    IMG_20150519_142451.jpg
    94.9 KB · Views: 25
  • IMG_20150519_143357.jpg
    IMG_20150519_143357.jpg
    153.4 KB · Views: 35
  • IMG_20150519_143346.jpg
    IMG_20150519_143346.jpg
    154.4 KB · Views: 32
  • IMG_20150519_143340.jpg
    IMG_20150519_143340.jpg
    112.4 KB · Views: 33
  • IMG_20150519_142506.jpg
    IMG_20150519_142506.jpg
    121.1 KB · Views: 24
  • IMG_20150519_142456.jpg
    IMG_20150519_142456.jpg
    95.9 KB · Views: 26

rushking19

Active member
Messages
1,045
Reaction score
0
Location
Richmond Virginia
More Pictures
 

Attachments

  • IMG_20150519_202757.jpg
    IMG_20150519_202757.jpg
    98.8 KB · Views: 24
  • IMG_20150519_202803.jpg
    IMG_20150519_202803.jpg
    63.7 KB · Views: 15
  • IMG_20150519_202908.jpg
    IMG_20150519_202908.jpg
    89 KB · Views: 18

rushking19

Active member
Messages
1,045
Reaction score
0
Location
Richmond Virginia
Are the instructions really that difficult to understand? I kept them as simple as possible:



Don't worry, I'll move it for you :toetap05: then, once you add a sign, I'll move it AGAIN

No The Instructions Were Very Simple But It Was Just Something That I Forgot About For Some Reason , I'll upload a picture of it today when I get off of school
 

OzFab

New member
Messages
15,615
Reaction score
8
Location
Warwick Qld, Australia
...& that's my point; the instructions were to start a thread in the build-off main area, not the general discussion area, there's even a link provided...
 

rushking19

Active member
Messages
1,045
Reaction score
0
Location
Richmond Virginia
Got My Engine Plate Welded, But The Bad News Is That The Guy I Took It To Can't Weld Or Didn't Weld It Good Im Not A Welder But I'm Pretty Sure It's Not Supposed To Look Like It Did. Upload Pictures Of The Actual Welds Later
 

Attachments

  • IMG_20150521_215920.jpg
    IMG_20150521_215920.jpg
    90.6 KB · Views: 22

rushking19

Active member
Messages
1,045
Reaction score
0
Location
Richmond Virginia
Here Go A Picture Of The Weld,I Talked To Him And He Said That I Should Bring it Back So I'm About To Take It Up There Right Now.
 

Attachments

  • IMG_20150522_150734.jpg
    IMG_20150522_150734.jpg
    102.2 KB · Views: 42
  • IMG_20150522_150758.jpg
    IMG_20150522_150758.jpg
    97.1 KB · Views: 51
  • IMG_20150522_150747.jpg
    IMG_20150522_150747.jpg
    84.9 KB · Views: 42

rushking19

Active member
Messages
1,045
Reaction score
0
Location
Richmond Virginia
Got It Fixed, I Told What Happened And He Said Bring It Up Here ,Brought It Up There And He Flipped It Over And He Started Welding And Then asked Me How It Looked And I Said Great And Then He Said Did I Know How To Weld Or Have I Ever Welded Before So He Let Me Weld Up The Rest And It Turned Out Pretty Good Not Bad For The First Time Ever Welding, It's Probably All The YouTube Shows I Watched That Talked About Welding In Them :lolgoku:
 

Attachments

  • IMG_20150522_204942.jpg
    IMG_20150522_204942.jpg
    84.7 KB · Views: 40
  • IMG_20150522_204933.jpg
    IMG_20150522_204933.jpg
    72.5 KB · Views: 47
  • IMG_20150522_201257.jpg
    IMG_20150522_201257.jpg
    95.9 KB · Views: 53

rushking19

Active member
Messages
1,045
Reaction score
0
Location
Richmond Virginia
Parts Are Here, I Also Worked On Cleaning The Carburetor In Boiling Lemon Juice It Worked Out Very Well And I Started Puting The Carburetor Back Together
 

Attachments

  • IMG_20150524_123221.jpg
    IMG_20150524_123221.jpg
    85.9 KB · Views: 12
  • IMG_20150524_144613.jpg
    IMG_20150524_144613.jpg
    35.3 KB · Views: 12
  • IMG_20150524_145109.jpg
    IMG_20150524_145109.jpg
    42 KB · Views: 12
  • IMG_20150524_155505.jpg
    IMG_20150524_155505.jpg
    61.2 KB · Views: 15
  • IMG_20150524_162336.jpg
    IMG_20150524_162336.jpg
    106.8 KB · Views: 15
  • IMG_20150524_165847.jpg
    IMG_20150524_165847.jpg
    89.1 KB · Views: 15

OzFab

New member
Messages
15,615
Reaction score
8
Location
Warwick Qld, Australia
The "repair" looks better but, I have to say, they still don't look great, could've been a bit hotter...

I have to ask, though, why is the engine plate sideways?
 
Status
Not open for further replies.
Top