Search results

I have taken on this project to help out a friend. My job is to fix the drivetrain only. Intended use is for young kids to have fun and not die. Will want to limit it to ~10mph. Two pictures are included showing the side view (driven wheel shown) and trunk engine compartment with the pulleys...

https://smile.amazon.com/Powered-Darkening-Professional-Adjustable-Grinding/dp/B06XS9ZR2H/ref=gbps_tit_s-4_a30e_b0052e6b?smid=A3QZTDXJUAJ2QI&pf_rd_p=b8f0f356-89c5-4ce1-a781-02aac81da30e&pf_rd_s=slot-4&pf_rd_t=701&pf_rd_i=gb_main&pf_rd_m=ATVPDKIKX0DER&pf_rd_r=S9361DYFRM42QEZM0CBF $52. I have a...

If your go kart slams into a parked car, who pays? Anybody have any first hand experience with insurance claims related to go karts? Personal injury or otherwise?

I added aftermarket seat belts and also added some steering shaft bushings/collars. I can post the links to the parts if that will help some out. https://youtu.be/m4QI8hgQ5ls Here is a video of it in action with the 7 year old driving: https://youtu.be/oeaKzU_zB9g And then the 5 year old...

I have a situation where the throttle cable has a 90 degree bend at the carb end. The carb body does not limit or prevent the throttle cable's metal conduit from simply going deeper into the carb. See the attached picture. This is on a youth ATV. The carb is aftermarket. I have never dealt...

Not power wheels, but full suspension, rubber tires with air, and dual brakes... http://www.powersportsmax.com/product_info.php/cPath/37_618/products_id/17604 I have modified a Razor dirt quad, but it has a ridged front end and short wheel base that makes tipping easy to do. Just curious if...

https://huntsville.craigslist.org/snw/d/carter-brothers-go-cart/6470090738.html

With the limited turning radius of a solid rear axle, and the cost complexity of a differential, what are the draw backs to a single rear wheel like the CanAm Spyder? I see where people slap motorcycle drive trains under golf karts. Anyway, just a random thought kind of thing. Build of 2018...

I bought a project kart that needed front wheels. Got it running and then on day one, I had a bearing failure after 30 minutes of use on a brand new bearing and wheel. The go cart is a yerf dog two seater. picture here...

This is a GX270. With the engine warm, I can put the choke at about 75% open and the idle is ~1500RPM. If I push the choke to 100% open, the engines idles down to about 800RPM and struggle to keep running, but does run for a while. What should my next step be? It's a stock setup. Vven the...

See video link: https://youtu.be/n_rhXqG0fcY Question: is the alignment of the driver versus the driven too far off? I measure a 0.250 lateral difference. If so, option A is that I space the driver away from the motor. with a 1" ID washer. Option B was to remove the washer next to the...

For those with a knock off 30 series, what is your Driven engagement RPM? I guess if you don't have a timing light, you just guess based on Throttle % ? I am wondering if the Chinese stuff comes with the blue spring and zinc weight I will have a GX270 on a two seater yerf dog coming together...

I just bought my first kart and did not notice that the two front wheels are different! Same tire, just different wheel hub backspacing and the previous owner hid it behind some large washers. The tires are dry rotted, so I am thinking of ordering a single factory complete wheel online + a new...

My yerf dog 30032 has a single rear brake that is worn out. The factory parts are: http://www.bmikarts.com/42-Brake-Band-_p_540.html http://www.bmikarts.com/4-Brake-Drum-with-1-Bore-Hub_p_3199.html However, the hub has a two piece replacement that usually costs $25 and is on sale for $19...

Yerf 30032 + GX270, help with torque converter This is my first kart and it is a project that currently does not run. I've been building cars my whole life (am 38 now), so I am not totally lost. My Yerf Dog 2-seater go kart has the factory engine (not attached) and the factory torque...

I just bought my first go kart and it is a project in pieces. Will be bringing it back to life with a GX270 Honda from a pressure washer. The torque converter is currently in pieces in a box. I think it is the original 40 series. Not sure it the shafts will match up or not... I'm off to go...