Search results

Ill trade for your new/old fancy kart :drool5: Totally, finally getting used for something good :thumbsup:

They are quite forgiving , my conversion spent the majority of it's run time at valve float. But yeah, heavy cast iron , better be safe. How fast you trying to go now? :sifone:

Seems like you had fun, nice kart!

Had this mosquito fogger 125cc china engine cracked open for over a year. Finally dids it. Removed all the unnecessary junk, torched /cut off the rod, blocked off holes , ect. Patched a crack with good ol marine tex. Ground the rivets off the flywheel, extracted the hub, and found an inch...

Well, if the drive is really 10t, with a 54t rear sprocket , you have a 5.4 to 1 gear ratio That , will give you, at a governed speed of 3600rpm, high ratio, 66KPH top speed. Takeoff ratio , with clutch in low range , 13.122:1 . Starting speed of 12kph. Below that the belt has to slip to move...

Ok, interesting design choice. Never seen a knockoff 40 series Comet with a thinner drive belt by choice. In that case, the powered handling of the clutch is lowered, so, yes, gearing may be a big issue. You may need to gear steeper to compensate for less meat on the belt. I was trying to...

The details make a difference. For your rig @3600rpm 10t=40mph 12t=48mph 14t=56mph, for sure to burn up belts , even when set up right. But id start by getting the correct width belt for the clutch to fit correct and work, you should not have to use a skinner belt, negates the point of...

I would look into why you have to use a 30 series belt to make it work, and get a count on that front sprocket. And is the belt symmetrical? Anyway when I troubleshoot something, I try to set everything right, reduce variables, and narrow down the problem.

It that a 3/4 belt? That looks skinny or burned down. Both your moving sheaves are on the same side, This is what sid was trying to tell you. In this case the Driven clutch, the one on the jackshaft, needs flipped the other way, if you want the cvt to work like comet intended. And keep the...

Is this a challenge? Id just simplify and make wood flip flops, and flintstone it. Im sure the spindles can be sourced from the right shaped tree branchs. And left.

At least when there was one locally, around 5 years ago, so much good stuff got thrown out. Seems like lots of people just buy a new one, when their unit gets slow. Instead of cleaning it up and getting rid of bloatware. Many decently relevant, and vintage pieces. Pulled an EICO ST70 full...

No sir that's too heavy for the 100mph goal, balsa frame. I was talking the heatshrink wrapping for model airplanes, aerodynamics and weight savings are mission critical.

Balsa wood and monokote are the preferred construction materials.

Here's 20 pages. Plenty. https://www.diygokarts.com/community/threads/budget-wooden-go-kart.43223/ Even if the Pic is fake or not yours, it still is an essential element in kick starting this party.

Halfway there , click the camera button, ok, shoot. Now go here, and click the paperclip attach files thing, and do so. No more excuses now. Lets see this masterpiece!

How do you post here? Welcome back! Obvious troll is Obvious. Look forward to your content.

1 out of 10 no proof Clickbait I at least put a similar displacement twin on a homemade single beam frame, and sent it. Lets see it already.

Git Gud U go fast wood kart u also post pics didnt happpn

:useless:

Less words. More Pics. U wont.