Search results

Hello forum members, I am deciding whether a diode/capacitor CW circuit,or a hand-wound step-up transformer is easier,and more practical; I am only needing at most a voltage multiplier(I am aimimg for 36 volt from a 12 volt AGM design strategy!) for my electric pmdc powered bike trailer with...

Re:Comet Comet V belt clutch 4 sale Hello Kartmofo, I am interested in buying the V-belt Comet clutch you have for sale, and would like to know if it is STILL 4 sale, and what it would cost to ship to zip:91324??? btw,I will pay by M/O, VISA Debit card/paypal only!! Thanks in advance for a...

Re:Honda wet clutch 2:1 reduction box Hello toofarnorth, I would be interested in purchasing the Honda gearbox ONLY(no need for Honda replacement parts at the moment!)you have 4 sale ; if still available I would like to know the S&H to:91324, as well as, the total price,and what form of...

Hello forum members, Its been awhile since my last post,so here is my latest; I have searched online-in vain obviously-for a header/expansion chamber exhaust manifold/muffler for a US Motors US820 2 cycle engine,but have only found pictures of these exhaust components!!:ack2: I have uploaded...

Hello forum members, I have a question regarding a custom exhaust head-pipe/flange for a Tecumseh 2 cycle engine;I noticed that ebay has some custom fabricated exhaust head/header pipes,but only for Mc Culloch Mac 10/West Bend Power Bees!:mad2: I have uploaded attachments that further...

I was thinking that the crankcase probably would be the easier of the two;the OEM Tecumseh intake pipe I just ordered looks like it would require LOTS of machining(tapping for 1/8 inch pipe thread into a fairly thick cross-section of the intake pipe!!) compared to the stamped steel crankcase...

Hello forum members, I am a 'newbie' when it comes to 2 cycle engines, specifically ones that use a diaphragm pump type carburetor;I need to know where I should tap a hole for the vacuum pulse to power the diaphragm fuel pump--would I get a better vacuum signal(this engine is a piston port...

Hello forum members, I have a parts interchange related question for a Tecumseh HSK850 that will be used for a scooter/kart I need to know the intake manifold elbow that is OEM for a similar displacement Briggs & Stratton since Tecumseh does not have an intake manifold adapter for my engines...

Hello forum members, I was wondering if anyone in diygikarts.com knows if the Tecumseh Power Products(NOT Power Sport!) model # AH82, 2- cycle engine for a home-built gokart?? The main reason I ask this is because I have a spare Tecumseh 2-cycle that has a piston port configuration, but I like...

Hey budd0413, I have a max-torque clutch for a #35 chain,but fits a 5/8 inch shaft/pto(you could use a sleeve bushing adapter for it)!! FYI, it has never been used (originally bought it for use with a #35 driven sprocket,but ended up getting a #40 chain driven sprocket,and max-torque #40...

Hello forum members, I just received my Tecumseh HSK850(5 H.P.) H-shaft engine yesterday,and need some advice;I have not gotten my replacement OEM(for a Tec.TVS840)muffler yet,but need to know where I may find an L-bracket(steel or cast aluminum) to mount the 2 cycle Tecumseh so I can run some...

Thanks for the tip,russ2251. I have not noticed any Tillotson carburetors on ebay for under 100 USD;I did happen to find a Tillotson HL360A with air horn/cleaner adapter for 1 GBP(or bid!!) on ebay.co.uk!!! The specs on that Tillotson look like it would work for 139 cc 2 cycle engine!! I will...

Hello forum members, I have a question about a Tecumseh I recently bought(at a great deal!!) that does not come with either the OEM carburetor nor OEM muffler!! I was wondering if anybody has used this engine for a diy gokart, and what Walbro carburetor would work best for this 2 cycle...

Hello forum members, I will be getting a Tecumseh Snow king 2 cycle engine soon that will not include the original carburetor/muffler; I was wondering what carburetor might work with this engine( 139 c.c.,8.5 c.i. displacement,4.5 hp):confused: I think the engine would need an intake manifold...

Thanks for the reply, Ironman. I got an answer regarding the Tecumseh engine exhaust port bolt spacing/dimensions from TEW that makes me think the Tecumseh header kit I found on another online source should be able to fit with some modification of the exhaust headpipe mounting flange bolt hole...

Hello forum members, I recently bought a Comet brand TAV-30 jackshaft plate for an 93 cc engine bought on Ebay;tha problem with this,however,is that it will only mount without part inter ference at a vertical position,i.e. in line with the engine block!!:huh: This may work out if I could...

Hello forum members, I hope this is the forum that I should post my question regarding Lifan engine exhaust head pipe(or usually muffler); I am looking for information where I may purchase a exhaust flange that has the Tecumseh/B&S oval outline,but has mounting bolt spacing of approximately...