Search results

So was loosing speed and the belt looked worn it's a (manco 5959) Came home today son was driving around says it's slow angle side of the belt is smoked. Found a belt at the local store 5959 it's a little shorter about 27" The manco measures about 28 but is worn barely 5/8 wide New one is nice...

My sons kart is having a problem Sometimes when riding he will stop turn it off and when he goes back can't start drive clutch is sticking I've takin apart cleaned and lubed with graphite And it still happens could it be that the belt is worn and causing this problem it locks in full drive...

Found this for 400$ anyone know anything about them good or bad Said the brakes where locking up Let me know what you think Thanks Mike http://www.diygokarts.com/vb/attachment.php?attachmentid=84486&stc=1&d=1494727723

Got my sons kart going new axle 3/4 With 3/4 hubs and the other day it through the chain. After looking at it I noticed the key on the sprocket was missing. Just noticed the set screw is still there. And there is another hub for the brake disc. Screw is still there and the key can be slid right...

Brother in law just sent me this pic Any clue what it is Looks like a lot of toe out And that steering setup is weird ---------- Post added at 05:13 PM ---------- Previous post was at 05:11 PM ---------- Trying to post pic with iPad arggggg ---------- Post added at 05:14 PM ----------...

my son got this kart from his uncle. the more I look at it the more I think it needs a complete new rear axle setup wheels everything. I could probably buy a better kart cheaper. it appers to of had a diff that was junk and now has a 3/4 non keyed axle jammed through the diff. and some sort of...

new here and to karts haven't touched one in 40 yrs. so my son got this given to him from his uncle. problem is with the axle locked when you turn its like hitting the brakes. not sure if it needs a diff or should it work with the live axle. I believe it had a diff and my brother inlaw said...