Search results

  1. karte_m0lim

    Minibike build

    front.. its hard to find "normal" tyre for minibike here so going to use go-kart narrow tyre.. initial paln was to use rear tyre and hydraulic brake but that would be too much wide .. also , I wanted to have fron susspension, tryed few types, but it's just...
  2. karte_m0lim

    Minibike build

    I do not like original fuel tank so maybe to use this one (at least to fill the gap between engine and seat)..
  3. karte_m0lim

    Minibike build

    frame... didn't like first version .. so changed a bit... and then , wheel was hitting a frame (03)... so changed again .. still going to be tight ..
  4. karte_m0lim

    Minibike build

    so first started with sprockets for TC... since last time I use it I had few kilos less ... :ROFLMAO::ROFLMAO::ROFLMAO: also had to make hub for rear sprocket..
  5. karte_m0lim

    Minibike build

    so, as there was lots of parts from past or broken projects , decided to build mini bike .. plan was to post it in build off thread but as ther is no 2021 , I will psot it here.. as I said , some parts I already have, somo of them are ordered , mostly...
  6. karte_m0lim

    Announcing DIYGK's 2020 Champ!!! GegCorp!

    Congratulations, great build.. when 2021 build off will start? :sifone:
  7. karte_m0lim

    Quick bits

    if eating my dust is rivalry ...
  8. karte_m0lim

    Buggy badland ST3

    hi.. as my last year contender failed ( ) I started new project .. There is video of progress so far : instead 5 speed suzuki DR600 engine, plan is to use scooter engine (with built in torque...
  9. karte_m0lim

    DIY 5 speed shifter kart

    do you missing clutch or stand switch ?
  10. karte_m0lim

    smilie test

  11. karte_m0lim

    Tractor guys thread

    do you have this in the States ? :D
  12. karte_m0lim

    Tractor guys thread

    well... this is Tomo TV521, I bought last year .. it is 40yrs + old .. few pict and restoration video ..
  13. karte_m0lim

    2019 - Buggy DR600

    Hi everyone This is my entry for 2019, but I will not finish it this year, hopefully for next year... The plan is to build two seater with 5 speed motorcycle engine, independent suspension.. Engine donor is Suzuki DR600 and for suspension parts I used seat Ibiza... For frame, plan is to use...
  14. karte_m0lim

    Noob questions - buggy

    Hi .. so plan is to build buggy, two seater, A-arms front suspension and swing arm at back with solid live axle. it will be used on gravel , grass and tarmac, no heavy dutty offroad.. it should look a like spiderkart grand daddy but slightly bigger as...
  15. karte_m0lim

    Trike - gx 140

    so, after my nephew crashed my kart, it sits around backyard for 2 yrs now (kart, not nephew ) and I decide its time do something about it .. few pictures below :
  16. karte_m0lim

    Honda NSR125 on All Kart

    Hi guys ... its been a while .. after my old projects ended ... let's not way i wanted (mz250 seized, my nephew crashed gx140) it was tiem for new project .. so first I got honda nsr 125 ccm engine .. 6 gears, 25 HP and planned to put it on mz250 chassis...
  17. karte_m0lim

    Engine identification needed

    Hi few day ago bought kart with two broken engines. need identification for one of those . it has no ID plate , only KART/HF/6 on block.. it is 2 stroke, 125 ccm, single cylinder, shifter (previous owner said 6 gears), equipped with motoplat ignition and...
  18. karte_m0lim

    F1 Gx 200

    Hi .. few words about this project.. I try to make gokart which looks like f1 car. I used 20 x 20 mm profile, engine is honda gx 200, tyres comes from buggy , gear ratio is 12:1 and top speed should be 30 km/h.. first idea was to use gokart tyres, but...
  19. karte_m0lim

    TC - order on shaft

    Hi guys I am lasy to google it.. My engine shaft is bit to short and I would like to move variomat and clutch to plate as much is possible.. It would save my day if i can change the order of elements on clutch shaft. Currently, it goes plate - spacer- sprocket- spacer - clutch - spacer...
  20. karte_m0lim

    2 questions

    1. Building or driveing, what gives you more fun? 2. Where is Jim... Regarding 1. When everything working I am missing something.. Luckly those are rare moments. :p Second, didnt been here for while, so where is Jim?