Recent content by W3sabi

I will put the 40 driven back on and see how the belt looks. Beltpalace will let me return the 858 series, but in their response, they listed 2 options as a replacement option for the 7/8" bore. Do you think either would be a better option or should I just choose one of the 500 series you...

Well, the good news is I got the Comet 500 series installed. I also removed the rear clutch (Remove 4 bolts from the frame sub-frame and lift with a jack, as you suggested). Now on the the bad news... I the two options in size for the 858 series clutch were 3/4" and 1" bore. I ordered the 3/4...

Ok, so I got the parts in. One question. What is the easiest way to remove the existing clutch. The shock is in the way preventing it from sliding out.

Sid, Thanks for your response. My serial number is prior to serial #42438. I ordered the 500/858 combo. However, I am still uncertain which belt would be the correct belt to order. I would like to just get a new one of these as well.

Thanks for the reply, it looks to me like the drive clutch is an aftermarket clutch. Does anyone have any recommendations other then replace all the parts and hope this fixes the "slow start" issue?

Ok, here is what I found out. The part number listed on the belt is - 2-20693 The diameter of the torque convert clutch is 5 3/8" dia. (1" bore) The Diameter of the drive clutch is 7 3/8 or 7 1/2" dia. I haven't removed this clutch yet to get an exact measurement. I have taken multiple...

Thank you for the responses. I will measure and take more pictures when I get home from work this evening with tooth counts and etc. I have attached some pictures I currently have on my phone just for reference for now. Does anyone know what belt should be the correct belt? I bought this used so...

Hello, I am new to the site and was wondering if anyone could help out. I have an 08 (I believe) BD-300 bulldogMy post is going to be somewhat a two part post. First, I am having somewhat of an issue with the “takeoff” speed of the UTV. When I push the pedal all the way to the floor it is very...