vpd66's latest activity

  • V
    vpd66 replied to the thread The Mule.
    Have you ever thought about using a 5 speed transaxle out of a small FWD car (Geo Metro comes to mind). Mount your secondary clutch to...
  • V
    vpd66 replied to the thread The Mule.
    I like where your going with this project. What are you going to use for a transmission? Will it be 4 wheel drive? I still can't believe...
  • V
    vpd66 replied to the thread Bandit buggy plans.
    222572337316 These plans are about has close to the Bandit buggy has your going to find. I believe these were made by Ted Willard. I...
  • V
    vpd66 replied to the thread The Mule.
    That must be a nice smooth riding truck! LOL Back when trucks were trucks!
  • V
    vpd66 replied to the thread Snowdog/track sled.
    There are a lot of variables when it comes to gearing. You need to adjust that clutch to engage quickly and get it locked up before your...
  • V
    vpd66 replied to the thread Snowdog/track sled.
    Those clutches can hold up if you understand how they work. You have to have your gearing right so the clutch slips just enough to get...
  • V
    vpd66 replied to the thread Snowdog/track sled.
    Looking good! I'm still in the pile of parts state! LOL
  • V
    vpd66 replied to the thread Milling a 420 head!.
    You will never know unless you do the math. I guess my intent of the post is to say there is no magic amount to mill off the head. First...
  • V
    vpd66 replied to the thread Milling a 420 head!.
    It all about compression ratio. You need to cc the head, know the head gasket thickness, measure your piston deck height, measure the...
  • V
    vpd66 replied to the thread Divorced Gearbox 4 speed Manual.
    How about taking the crank out and pressing it apart, cutting counter weights down has far has you can, throw away the crankpin that the...
  • V
    vpd66 replied to the thread Divorced Gearbox 4 speed Manual.
    Instead of removing weight off the counter weights why not just build a "bob weight" like they do when they balance a crankshaft. They...
  • V
    vpd66 replied to the thread Divorced Gearbox 4 speed Manual.
    Nice work. Make sure the direction of the input (crankshaft) shaft turns the same direction as the output shaft. If that makes sense? LOL
Top