SquidBonez's latest activity

The spring from a cheap wood clamp works good too, and theyre only a couple bucks for clamp.

inside pic showing the spring

Some sort of high density plastic. Got it off Amazon. As for the spring tension I believe it will be enough, but if not i have multiple...

Been doing some test riding before I finally paint it to make sure there's no welding left to do. After throwing a chain I decided to...

Depends on what ya plan on building. How big? How much power? How heavy? 1 inch x.120 is pretty versitile, easy to work with and if done...

Is it possible that the angle of the carb is way off level when the swing arm swings its full travel? That in combination with the...

Not an uncommon way. Honda carbs (some) are the same. It's a labrinth, normally they don't leak much. Not all that different than a hose...

One thing I didn’t see addressed in these posts was checking there are no cracks or deformities in the hard black plastic...

I'm no expert, but I would guess the more bouncing around the worse the problem. I don't think its exclusive to swing mounted...

I have the swingarm set to be slightly tilted back when I'm not in it so it levels out when I sit in it. The axle sit just slightly...

Plans without dimensions are called pictures. Call them, they obviously made an error.