Recent content by shinwrx187

  1. S

    145/70-6 Tires and brake caliper upgrade q's

    Ordered a 40 tooth sprocket. Installing that and changing the 10T smaller sprocket with the same setup 30 series torque converter and a 35 chain. Depending on the same 145/70-6 or smaller tires/slicks same size 6" rims. Setup with 10T/72T sprocket and 35 chain with bald tires.. top speed is...
  2. S

    Cleaning Seat?

    I would say its most definitely worth giving it a try. Post some more pictures if it works out for you.
  3. S

    Cleaning Seat?

    If u dont want to scratch the ever living life out of that, looks like plastic. Could be made out of fiberglass.. cant really tell from the pic but i would use some really hot water and some dawn dish soap. U could try soaking it, or even better if u have a pressure washer, ive got one it was...
  4. S

    145/70-6 Tires and brake caliper upgrade q's

    I removed the governor and internals. Im sure if i went with the same 145/70-6 rims and tires on the rear, switched the axle sprocket to a 48T and kept my 10T and use 5" rims and tires for the front i could most definitely gain some much needed mph say 5 or 10mph. Ya or nay?
  5. S

    145/70-6 Tires and brake caliper upgrade q's

    Anyone else have any suggestions for the 6" rim size? I was thinking about keeping the fronts the same size 145/70-6. replacing the rears with say 8" rims and tubeless tires? would that work out for me I'm not sure about rims and tire sizes that's why I'm posting. I want to change my 72 tooth...
  6. S

    First time kart owner - manco dingo

    You should be able to use everything, pulleys, sprocket, chain ect. Your basically just bolting a new engine to your stand/body. You might need a couple different bolts here and there misc stuff but you should be able to get it going and i guarantee you'll be way happier cause the motor is brand...
  7. S

    Clogged fuel jet

    Use lacquer thinner to clean everything out and soke. Use a aluminum tin or a paint roller tin to keep all the parts in. Check out some youtube videos to on how to completely clean your model carb. Good luck.
  8. S

    5hp briggs governor and engine reving issue

    Soldiered my throttle to a piece of the control arm to the stock carburetor. Now that im only running the pedal cable to the stock carburetor it grabs wayyy better and is more responsive. Took alot of patience im talking couple hours.. went to fire it up and for some reason i had no spark...
  9. S

    5hp briggs governor and engine reving issue

    I hope so lol i just noticed all that was left was the long pin. Put the casing on gently cause i wasnt sure if that pin was going to be an issue. Im sure i did remove it i have the parts in my tool box in a small box. I always keep bolts and misc stuff to try and save money on other projects if...
  10. S

    5hp briggs governor and engine reving issue

    Yes sir. I hope to get everything wrapped up today and take it for a much needed spin 😆
  11. S

    5hp briggs governor and engine reving issue

    Yeah i removed everything, except the push pin that holds the plastic gear into place. As for the engine seems to have wayyy better response to the throttle and reving, the live axle kicks in harder and feel more torquay. I appreciate the link but im going to use the metal piece from the linkage...
  12. S

    5hp briggs governor and engine reving issue

    Id rather not remove it right now. How come every position ive set the shaft all the way counter clockwise, spin clockwise halfway in the middle still does the instant reving i dont understand like everything ive done nothing works. I watched a video and taking the engine cover off and popping...
  13. S

    5hp briggs governor and engine reving issue

    135212 5hp briggs. I was adjusting the governor last night and it starting getting dark so i gave up. I have turned it counter clockwise all the way it will start and instantly go to full throttle. Since the 3/16 bolt is stripped i have to manually turn the arm put the adjustment back on the arm...
  14. S

    30 series sprocket help

    Right on man great idea so basically i just need a new set of 5" 5/8 rims and tires should bolt right up?
  15. S

    145/70-6 Tires and brake caliper upgrade q's

    Yeah i was thinking the exact same it is a live axle, so basically just measure the width of the tire and how close it comes to the frame so it wont rub. Id like to run some slicks on this thing but its not that fast lol i just want to get wider tires for the rear and better brakes so it rides...
Top