Go Back   DIY Go Kart Forum > Building Plans And Advice > Mini Bikes, Trikes, and Choppers

Notices

Closed Thread
 
Thread Tools Display Modes
  #1  
Old 02-28-2007, 12:59 PM
Funk_07 Funk_07 is offline
Junior Member
 
Join Date: Feb 2007
Posts: 1
Thanks: 2
Thanked 0 Times in 0 Posts
Default Help Help< Please Help!!

i was looking for a welding project to do in my high school, in riverton wyoming. I am an advanced welding student and have been welding for four years. I decided to do the mini chopper design from this web site. i thought it would be really awesome and cool to customize my own mini chopper. So i printed off the plans. I read through the plans but they didnt have all the specs. Im no pro so i need some help. IF ANYONE has any specs on lenght of metal for the frame or anything like step by step blue prints it would be greatly appreciated. then i could start. i could start but i dont wanna mess anything up because i have to pay for the metal and supplies myself. so PLEASE PLEASE help me with how long the metal pieces are i cut and bend to make the frame and the rest of the bike!! thank you. YOu can e-mail me the specs or blue prints or just tell me how long stuff needs to be on here. kf_2007@hotmail.com lol i need help bad!!

Last edited by Funk_07; 02-28-2007 at 01:05 PM.
  #2  
Old 02-28-2007, 03:21 PM
robertdjung's Avatar
robertdjung robertdjung is offline
Administrator
 
Join Date: Oct 2006
Location: Austin, Texas
Posts: 2,775
Thanks: 326
Thanked 1,024 Times in 427 Posts
Default

the one from the site is 21" from the neck to the bend, and 28" from the bend to the rear. that was also a small engine -- ensure that your engine will fit.

the way that i like to establish the frame design is to mock it up with dowel rods, measuring sticks, whatever's around.

good luck!
The Following User Says Thank You to robertdjung For This Useful Post:
Funk_07 (02-28-2007)
  #3  
Old 02-28-2007, 06:10 PM
mikeandike mikeandike is offline
Senior Member
 
Join Date: Sep 2006
Posts: 232
Thanks: 2
Thanked 19 Times in 19 Posts
Default

i think on this site that we are not really design freaks as in we improvise while we go... it might help to get some chalk and draw something on the cement
The Following User Says Thank You to mikeandike For This Useful Post:
Funk_07 (02-28-2007)
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -6. The time now is 09:19 PM.