Go Back   DIY Go Kart Forum > Building Plans And Advice > Go Kart Discussion

Notices

Reply
 
Thread Tools Display Modes
  #1  
Old 08-25-2019, 02:55 PM
Green Machine Green Machine is offline
Junior Member
 
Join Date: Aug 2019
Location: Aberta Canada
Posts: 3
Thanks: 2
Thanked 0 Times in 0 Posts
Default Manco Deuce

i picked up this Manco Duece for the kids and me , and as with any used purchase there is some stuff that needs attention..... and i am trying to find a local source for parts and a proper service manual.

long story short.... kids ran into the fence and bent the p.s. axle which i think i can straighten if i can get it out (brake rotor hits the frame before the splines clear the axle housing). also the d/s rear wheel lug nut holes are all rounded out (came this way) so i need a 8" by 10" wide rim . and all four shocks are seized

i am sure there is more issues but these are my priorities
thanks in advance and sorry for rambling on
Reply With Quote
  #2  
Old 08-25-2019, 06:51 PM
Kartorbust's Avatar
Kartorbust Kartorbust is online now
Senior Member
 
Join Date: Feb 2016
Location: Lincoln, NE
Posts: 2,766
Thanks: 594
Thanked 745 Times in 627 Posts
Default

Here's potentially a manual for you in this list. https://www.bmikarts.com/Manco-Manua..._ep_182-1.html

You might be hard pressed to find parts for it, as Manco has not been in business for quite a few years now. If you call GoPowerSports in Texas, they should be able to get you parts you need. Not everything they sell is listed online yet.
__________________
In the age of information, ignorance is a choice.
Reply With Quote
The Following User Says Thank You to Kartorbust For This Useful Post:
Green Machine (08-25-2019)
  #3  
Old 08-25-2019, 08:49 PM
Green Machine Green Machine is offline
Junior Member
 
Join Date: Aug 2019
Location: Aberta Canada
Posts: 3
Thanks: 2
Thanked 0 Times in 0 Posts
Default

i was able to straighten the axle today , still working on the damaged rim .i didnt see my exact style 2 seater with a swing arm rear suspension in that list, but i am sure one of them will be close enough to figure out fluid capacities and weights for the 12 hp techumseh .
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -6. The time now is 01:56 PM.