Go Back   DIY Go Kart Forum > Other Stuff > Off Topic Forum

Notices

Closed Thread
 
Thread Tools Display Modes
  #1  
Old 11-21-2018, 04:56 PM
trialsmaniac trialsmaniac is offline
a guy that rides trials
 
Join Date: Nov 2018
Location: Brisbane, QLD, Australia
Posts: 24
Thanks: 5
Thanked 2 Times in 2 Posts
Default Young Guns

Hello from aus
I have visited the "This my motorcycle thread" and was thinking i could create my own. so here goes nothing. just putting it out there I'm 12 and am currently planing a Honda CT110 powered trials bike and will then be moving up to a 2 stroke Bulltaco.(bull-taa-k-O). so if there are any smart young guns out there riding moto comps or for fun, I would like to here from you.

from the land down under.
  #2  
Old 11-21-2018, 07:55 PM
Mammoth's Avatar
Mammoth Mammoth is offline
Senior Member
 
Join Date: Jan 2015
Location: Durham, CA
Posts: 103
Thanks: 14
Thanked 76 Times in 47 Posts
Default

The CT110 can be built into a decent trials bike. A few on the web have done it.
It would be a good idea to use an S90 or a CL90 manual clutch which is interchangeable with the CT110.
Im a big fan of the CT90/CT110's
  #3  
Old 11-21-2018, 09:29 PM
trialsmaniac trialsmaniac is offline
a guy that rides trials
 
Join Date: Nov 2018
Location: Brisbane, QLD, Australia
Posts: 24
Thanks: 5
Thanked 2 Times in 2 Posts
Default

That's cool, i have been looking on gumtree for a decent ct110. down here in aus its hard to find one that is in a fair condition.
also would you recommend any frame or power mods e.g. boring and stroking or cutting off the back of the rear gard just after the shocks.

thanks for the replie
trials maniac
  #4  
Old 11-21-2018, 09:50 PM
Mammoth's Avatar
Mammoth Mammoth is offline
Senior Member
 
Join Date: Jan 2015
Location: Durham, CA
Posts: 103
Thanks: 14
Thanked 76 Times in 47 Posts
Default

Fit on a TRX125/ATC125M cylinder. It can be bored safely to 56mm.
Put in a TRX125 performance cam from Webb cams.
Time the valves
Fit on a 28mm Dellorto carb.

This is just for starters. I could go on and on, but you would need a machine shop.
  #5  
Old 11-21-2018, 11:34 PM
landuse's Avatar
landuse landuse is offline
Moderator
 
Join Date: Nov 2010
Location: Pietermaritzburg, South Africa
Posts: 17,199
Thanks: 2,046
Thanked 3,401 Times in 2,770 Posts
Default

Welcome to the forum!!!
  #6  
Old 11-22-2018, 12:24 AM
trialsmaniac trialsmaniac is offline
a guy that rides trials
 
Join Date: Nov 2018
Location: Brisbane, QLD, Australia
Posts: 24
Thanks: 5
Thanked 2 Times in 2 Posts
Default

Quote:
Originally Posted by Mammoth View Post
Fit on a TRX125/ATC125M cylinder. It can be bored safely to 56mm.
Put in a TRX125 performance cam from Webb cams.
Time the valves
Fit on a 28mm Dellorto carb.

This is just for starters. I could go on and on, but you would need a machine shop.
thanks. i think my school might have the necessary tools and machines.
trialsmaniac

---------- Post added at 05:24 PM ---------- Previous post was at 05:08 PM ----------

Quote:
Originally Posted by landuse View Post
Welcome to the forum!!!
thanks landuse for the welcome i can already tell im gonna fit in.
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -6. The time now is 06:20 AM.