Go Back   DIY Go Kart Forum > Building Plans And Advice > All Other Parts

Notices

Closed Thread
 
Thread Tools Display Modes
  #1  
Old 01-31-2019, 07:06 AM
67StingrayJ 67StingrayJ is offline
Member
 
Join Date: Jan 2019
Posts: 73
Thanks: 3
Thanked 1 Time in 1 Post
Default single sided swing arm

I’m trying hard to design a single sided swing arm rear suspension like shown below.
https://www.offroadfabnet.com/forums...ad.php?t=11315


The biggest problem I’m having is lack of parts. Sure there are gobbles or parts out there but not what I’m after. I want a good hub that I can grease easily with a disc brake hub attachment capability. The axle I’m looking for needs about 1.250” of 3/4” threads, followed by a 1” spline that will fit the drive hub. Then it eventually needs to step up to a 1-1/4 diameter with a better means of attaching a sprocket. I’m not a fan of the China supplied parts like hubs, axles or wheels but I’m not opposed to them if I can find something that is universal to some degree. I been finding mixed results on bolt hole patterns for wheels, disc brakes and sprockets and I’m getting frustrated. MFG these days want to sell you a part based on what it fits rather than give you a set of detailed specifications or drawings to work from. I want to get something that will enable me to install a better tire and wheel later on, as well as easily found sprockets that will bolt right up. So I been spending a lot of time on ATV forums trying to find out what the typical bolt hole pattern is for say a Yamaha or Polaris or Honda ATV. Mainly sprockets, disc brakes and wheels. But I’m also interested in a good size chain too. It sounds like a 420 chain is common. Or at least a 1/2” pitch chain. If anyone has a good lead on these things, axle, wheel hub, disc brake hub and sprocket hub let me know.
  #2  
Old 01-31-2019, 07:35 AM
ezcome-ezgo's Avatar
ezcome-ezgo ezcome-ezgo is offline
G'me sumthin to write on
 
Join Date: Aug 2015
Location: Atlanta, GA
Posts: 3,017
Thanks: 2,483
Thanked 1,007 Times in 808 Posts
Default

I'd start here.
Attached Thumbnails
Lathe-for-Metalworking.png  
__________________
My name is Sylvester McMonkey McBean. I will make a decontamination.
  #3  
Old 02-01-2019, 10:00 AM
67StingrayJ 67StingrayJ is offline
Member
 
Join Date: Jan 2019
Posts: 73
Thanks: 3
Thanked 1 Time in 1 Post
Default

Quote:
Originally Posted by ezcome-ezgo View Post
I'd start here.
Yeah, thanks for being so helpful...
  #4  
Old 02-01-2019, 10:31 AM
itsid's Avatar
itsid itsid is offline
Moderator
 
Join Date: Jul 2013
Location: Ruhrpott [Germany]
Posts: 10,348
Thanks: 1,406
Thanked 4,363 Times in 3,282 Posts
Default

No HiJacking!
•MOVED•

'sid
__________________
Jokes about german sausage are the wurst.
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -6. The time now is 10:02 AM.